plate
Rotary Table HV4+100mm Chuck+Backplate+Tailstock + Indexing Plate + clamping kit
With 100 mm Self Centering Chuck, Backplate. Tailstock for HV4 and HV6, Indexing Plate Set & clamping kit. Rotary Table HV4 with 100 mm Self Centering Chuck & Backplate. Our Rotary Table HV4 is having a Table Diameter : 110 mm (4-3/8). Table Height: 80 mm (3 -1/8). Worm Gear Ratio – 1:90, which means that 1 handle rotation shall turn the table by 4 Degrees. Centre Bore of the Table MT2. Table Graduated 360 Degrees. Handwheel graduated in seconds. Vernier scale is caliberated to 10 seconds. 2 Oiling Points for a direct lubrication of the Table for longer life & better performance. Can be clamped in Horizontal as well Vertical Position. It is combined with a high Quality 100 mm 3 Jaw Self centering chuck body made from SG Iron & Jaws are of Tool steel hardened & ground. A set of reversible jaws is supplied extra. Supplied with a mounting back plate, fixing tee nuts with screws, 100 mm Self Centering Chuck, Tailstock for HV4 and HV6, & Indexing Plate Set. Designed to fit our 3 or 4 Rotary table with either 3 or 4 slots. The Back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. The recess of the back plate is machined perfectly to fit the recess of the chuck to avoid any play. Fit to our HV4 and HV6, Tilting Rotary Tables 100 mm. Plate 1 – 15, 16, 17, 18, 19, 20. Plate 2 – 21, 23, 27, 29, 31, 33. Plate 3 – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. For HV4 & HV6. Its made of good Quality of Cast Iron. Height is adjustable from 80 mm to 110 mm. It is used on our HV4 & HV6 ROTARY TABLE. It is USED WHEN BETWEEN CENTER WORK IS REQUIRED. THESE ARE ADJUSTABLE FOR DIFFERENT HEIGHTS & Having fine feed center point and the center tip is hardened and Ground. The item “Rotary Table HV4+100mm Chuck+Backplate+Tailstock + Indexing Plate + clamping kit” is in sale since Monday, August 24, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “proffesional_tools” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Operation: Manual
- Brand: Unbranded
- Cross-Slide: No
Hv4 Rotary Table(4 Slot) With Dividing Plate/indexing Plate & M8 Clamping Kit
ROTARY TABLE 4 (HV4). High Precision and Smooth Rotation of Hand wheel. Table Diameter Is 110mm, Table Height 80mm, Centre Height 80mm. Centre Has a MT-2 Taper, Worm Gear Is 90-1. Vernier Scale Calibrated To 10 Seconds. Quick Release System for Manual Indexing. And Has 4 Tee Slots. These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. INDEXING PLATES SET FOR HV4 & HV6. Fit to our HV4 and HV6, Tilting Rotary Tables 100 mm. Plate 1 – 15, 16, 17, 18, 19, 20. Plate 2 – 21, 23, 27, 29, 31, 33. Plate 3 – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. We reply within 24 hours. Transit times may vary particularly during peak periods. Thanks for Visiting our Store. The item “HV4 ROTARY TABLE(4 SLOT) WITH DIVIDING PLATE/INDEXING PLATE & M8 CLAMPING KIT” is in sale since Wednesday, October 7, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded
Rotary Table Hv4 (4 Slot) With Indexing Plate Set / Dividing Plate Set
ROTARY TABLE HV4 WITH INDEXING PLATE SET FEATURES. High Precision and Smooth Rotation of Hand wheel. Table Diameter Is 110 mm, Table Height 80 mm, Center Height 80 mm. Center Has a MT-2 Taper, Worm Gear Is 90-1. Vernier Scale Calibrated To 10 Seconds. Quick Release System for Manual Indexing. And Has 4 Tee Slots. Plate’A’ – 15, 16, 17, 18, 19, 20. Plate’B’ – 21, 23, 27, 29, 31, 33. Plate’C’ – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. The item “ROTARY TABLE HV4 (4 SLOT) WITH INDEXING PLATE SET / DIVIDING PLATE SET” is in sale since Friday, November 6, 2020. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “easystreet_hangout” and is located in DASNA, UTTAR PRADESH. This item can be shipped worldwide.
- Brand: Unbranded
- Country/Region of Manufacture: India
- Cross-Slide: No
- Custom Bundle: No
- MPN: Does Not Apply
- Operation: Manual
- Setting Position: Horizontal/Vertical
- Tilting: No
VERTEX HV-8 (4-Slot) 8 Horizontal/Vertical Rotary Table with 4-Slot Face Plate
VERTEX HV-8 (4-Slot) 8 Horizontal/Vertical Rotary Table with 4-Slot Face Plate. Our Tables are made of high density Meehanite and use “HEIDENHAIN” electronic equipment to inspect angle to assure the excellent quality and durableness. Use excellent machining center to process. Spindle end be applied accuracy bearing. Can be assured to keep very steady under load cutting. Worm is hardened and ground. The ratio is 90:1. The work table is graduated a full 360° so that one turn of the handle moves the table through 4°. Micro collar is graduated in steps of 1’min. And vernier scale makes settings down to 10 seconds possible. These Rotary Tables are popular for their excellent performance, practical design and reasonable cost. They are widely used for circular cutting work, angle setting, boring, spot-facing and similar work. Using the Key guide block, the center can be corrected quickly and accurately. If You have any questions regarding this item, please let us know we’ll be happy to help. The item “VERTEX HV-8 (4-Slot) 8 Horizontal/Vertical Rotary Table with 4-Slot Face Plate” is in sale since Wednesday, November 11, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “eisenmachineryinc” and is located in Ontario, California. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
- Brand: VERTEX
- MPN: HV-8-4
- Country/Region of Manufacture: Taiwan
- Model: HV-8 (4 slots)
Rotary Table HV4+100mm Chuck+Backplate+Tailstock + Indexing Plate + clamping kit
With 100 mm Self Centering Chuck, Backplate. Tailstock for HV4 and HV6. Rotary Table HV4 with 100 mm Self Centering Chuck & Backplate. Our Rotary Table HV4 is having a Table Diameter : 110 mm (4-3/8). Table Height: 80 mm (3 -1/8). Worm Gear Ratio – 1:90, which means that 1 handle rotation shall turn the table by 4 Degrees. Centre Bore of the Table MT2. Table Graduated 360 Degrees. Handwheel graduated in seconds. Vernier scale is caliberated to 10 seconds. 2 Oiling Points for a direct lubrication of the Table for longer life & better performance. Can be clamped in Horizontal as well Vertical Position. It is combined with a high Quality 100 mm 3 Jaw Self centering chuck body made from SG Iron & Jaws are of Tool steel hardened & ground. A set of reversible jaws is supplied extra. Supplied with a mounting back plate, fixing tee nuts with screws, 100 mm Self Centering Chuck, Tailstock for HV4 and HV6, & Indexing Plate Set. Designed to fit our 3 or 4 Rotary table with either 3 or 4 slots. The Back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. The recess of the back plate is machined perfectly to fit the recess of the chuck to avoid any play. Tailstock for HV4 & HV6. Its made of good Quality of Cast Iron. Height is adjustable from 80 mm to 110 mm. It is used on our HV4 & HV6 ROTARY TABLE. It is USED WHEN BETWEEN CENTRE WORK IS REQUIRED. THESE ARE ADJUSTABLE FOR DIFFERENT HEIGHTS & Having fine feed centre point and the centre tip is hardened and Ground. The item “Rotary Table HV4+100mm Chuck+Backplate+Tailstock + Indexing Plate + clamping kit” is in sale since Monday, February 24, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “perfetto_pan” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- Bundle Listing: Yes
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded/Generic
12 Precision Horizontal & Vertical Rotary Table & 6×9 Angle Plate
12 Precision Horizontal & Vertical Rotary Table & 6×9 Angle Plate. The item “12 Precision Horizontal & Vertical Rotary Table & 6×9 Angle Plate” is in sale since Monday, December 14, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “mken1005″ and is located in Orange, California. This item can’t be shipped, the buyer must pick up the item.
- Setting Position: Horizontal/Vertical
- Brand: Universal
- MPN: 535-3320
6 Rotary Table 3 Slot With Dividing Plate set, Tailstock & M8 Clamping Kit
Precision Rotary Table 6/150mm. With Dividing Plate Set, Tailstock & M8 Clamping Kit. Manufactured from High grade seasones casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1. Horizontal Height : Approx 80mm from Base to Top surface of Chuck. Plate’A’ – 15, 16, 17, 18, 19, 20. Plate’B’ – 21, 23, 27, 29, 31, 33. Plate’C’ – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. It is an adjustable height tailstock used when you need to support a long part held in the rotary. Table- such as cutting a spline on a shaft. Precision made of heavy cast iron, it has a base for mounting to the mill table with T- bolts. Manufactured from Seasoned Grade Casting. Adjustable to Center Heights from 85 – 110 mm. These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. We reply within 24 hours. Transit times may vary particularly during peak periods. Thanks for Visiting our Store. The item “6 Rotary Table 3 Slot With Dividing Plate set, Tailstock & M8 Clamping Kit” is in sale since Thursday, October 8, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded
Rotary Table HV4 4SLOT with 100 mm Chuck, Tailstock & Indexing Plate Set
With 100 mm Self Centering Chuck, Back plate. Tailstock for HV4 and HV6 & Indexing Plate Set. Rotary Table HV4 with 100 mm Self Centering Chuck & Back plate. Our Rotary Table HV4 is having a Table Diameter : 110 mm (4-3/8). Table Height: 80 mm (3 -1/8). Worm Gear Ratio – 1:90, which means that 1 handle rotation shall turn the table by 4 Degrees. Center Bore of the Table MT2. Table Graduated 360 Degrees. Hand wheel graduated in seconds. Vernier scale is calibrated to 10 seconds. 2 Oiling Points for a direct lubrication of the Table for longer life & better performance. Can be clamped in Horizontal as well Vertical Position. It is combined with a high Quality 80 mm 3 Jaw Self centering chuck body made from SG Iron & Jaws are of Tool steel hardened & ground. A set of reversible jaws is supplied extra. Supplied with a mounting back plate, fixing tee nuts with screws, 100 mm Self Centering Chuck, Tailstock for HV4 and HV6, & Indexing Plate Set. Designed to fit our 3 or 4 Rotary table with either 3 or 4 slots. The Back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. The recess of the back plate is machined perfectly to fit the recess of the chuck to avoid any play. Fit to our HV4 and HV6, Tilting Rotary Tables 100 mm. Plate 1 – 15, 16, 17, 18, 19, 20. Plate 2 – 21, 23, 27, 29, 31, 33. Plate 3 – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. Tail stock for HV4 & HV6. Its made of good Quality of Cast Iron. Height is adjustable from 80 mm to 110 mm. It is used on our HV4 & HV6 ROTARY TABLE. It is USED WHEN BETWEEN CENTER WORK IS REQUIRED. THESE ARE ADJUSTABLE FOR DIFFERENT HEIGHTS & Having fine feed center point and the center tip is hardened and Ground. We reply within 24 hours. Transit times may vary particularly during peak periods. Thanks for Visiting our Store. The item “Rotary Table HV4 4SLOT with 100 mm Chuck, Tailstock & Indexing Plate Set” is in sale since Monday, February 24, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “perfetto_pan” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- Bundle Listing: Yes
- Non-Domestic Product: No
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded/Generic
2-3/4 Watchmaking Rotary Table, 50 MM 3 Jaws Self Centering Chuck +back Plate
Set includes 2.75 Inches Rotary Table-4 Slots with a 50 mm 3 jaws self centering chuck & back plate + T nuts. Supplied with a Quality 50 mm Small 3 jaws self centering chuck & a Back Plate with fixings. Worm- Gear Ratio is 1: 48, which means that 1 handle rotation shall turn the table 7.5 degrees. Most preferred choice of Watch makers, Jewelry Tools, Model Makers & Hobbyists. The item “2-3/4 WATCHMAKING ROTARY TABLE, 50 MM 3 JAWS SELF CENTERING CHUCK +BACK PLATE” is in sale since Monday, November 30, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “globaltools2016″ and is located in Delhi, Delhi. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded
New Rotary Table 3/75mm, 4jaw Chuck Self Centring with Back Plate Set, Clamping
Integrates of Rotary Kit. Rotary Table 3/75 mm. 2 4 Jaw Chuck Self Centering with Back Plate 70mm. Weight of Kit :- 3.8 Kgs / 8.36 Lbs. Chuck Size:- 70mm. Precision ground horizontally and vertically. Graded cast iron and precision ground. The work table is graduated to full 360 degrees. Gear Ratio 36:1. Uses of Rotary Table. Is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed. A rotary table can be used. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. Create large-diameter holes, via milling in a circular toolpath, on small milling machines. To cut straight lines &. The 4 jaw chuck has a big range clamping. The chuck has 4 reversible jaws. There is a fixture plate on which the chuck is mounted. The colour of item can be vary depend upon availability. The item “New Rotary Table 3/75mm, 4jaw Chuck Self Centring with Back Plate Set, Clamping” is in sale since Monday, March 18, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tool-supplier” and is located in DELHI, DELHI. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
- California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Modified Item: No
- Chuck size: 4 Jaw Chuck Self Centering 70 mm plate
- Country/Region of Manufacture: India
- Weight of Kit: 3.8 Kgs / 8.36 Lbs
- Operation: Manual
- Brand: Unbranded