table
Haas HRT160 Rotary Table 4th Axis Indexer 17 Pin Interface with Controller













Haas HRT160 Rotary Table 4th Axis Indexer 17 Pin Interface with Controller.

Rotary Table 100 mm 4 Inches Horizontal And Vertical With Center Square 3 Inches




ROTARY TABLE 4 Inch. Horizontal/ Vertical Rotary Table. Table Diameter: 100 mm / 4 Inch. Vertical Centre Height 53 mm/. Table Graduated 0-360 Degrees. 4 Slot Rotary Table. Hand Wheel can be set to Zero. Hand Wheel Graduated in 10 Min Divisions. CENTER SQUARE 3 Inch. Made from ground tool steel. Hardened and tempered blade. LENGTH – 3 Inch.

380 mm Low Milling Rotary Table (50mm 3Jaws Chuck, Back Plate & Fixing T nuts)







3Inch II 80 mm Low Profile Milling Rotary Table (50 mm 3 Jaws Chuck with Back Plate & Fixing T nuts). Quality Milling Indexing Combo Kit includes include 1 Pc x Low profile 3 II 80 mm Rotary Table supplied with a 50 mm 3 Jaws self centering & suitable Back Plate & T-nuts Bolts for your small light milling jobs. Rotary Table’s Horizontal Center Height When Laid Flat : 44 Mm (without Chuck Assembly) & 98 Mm (with Chuck Assembly On It). Center Height In Vertical Position Is 45 Mm Approx. Can Be Mounted Both In Horizontal & Vertical Position. Rotary Table’s Worm : Gear Ratio Is 1: 10, that Means One Handle Rotation Turns The 360 Degrees Graduation Table By 10 Degrees. Hand Wheel Is Graduated In Divisions Of 10 Min & Can Be Set To Zero. Base Dimensions: 110 X 85 Mm Ii 2 X U Slots For Clamping: 8 Mm. It is mainly used to cut gear teeth accurately and equal spacing of the teeth of the gear. Also used for milling gears, splines, squares, cutting of flutes in reamers, drills and milling cutters, racks, grinders, etc. Chuck & Rotary Table Body is made out of Caste Iron Body. Rest Parts & Clamp kit is Tool Steel. 1 Pc each x 3Inch II 80 mm Rotary Table, Back Plate & Chuck. Pls Note That We Do Not Deliver To The PO Box Addresses. Please Be Aware That Some Countries May Have Local Import Regulations Which Restrict Certain Products From Being Imported. We Take Complete Onus And Responsibility Of Supplying You A Completely Brand New Product Without Any Manufacturing Or Transit Damage.

Brand New 100mm 4 Rotary Table 3 Slot MT2 Bore Engineering Tools Milling MTI




4 HORIZONTAL / VERTICAL ROTARY TABLE. 4 / 100MM ROTARY TABLE. VERTICAL CENTRE HEIGHT 74MM. TABLE GRADUATED 0-360 DEGREES. Ratio is 36-1 MT2 BORE.

Nib! Phase II 220-012 12 Rotary Table



PHASE II 220-012 12 ROTARY TABLE. PHASE II 220-012 12 ROTARY TABLE 4MT Center Hole Concentricity (Decimal Inch) 0.0008 Base Length (Inch) 16-1/8 Overall Height (Inch) 4-7/16. NEW in original package, may be open box from viewing, inspecting or from taking pictures but never the less, item is NEW. Old inventory may also be repackaged due to old, worn or damaged original packaging. 15 TO 30 YEAR OLD INVENTORY RECOVERED FROM WAREHOUSE STORAGE. MAY SHOW SIGNS OF AGING! SIMILAR TO UNIT SHOWN IN PICTURE! Please read description carefully, we describe our items as best as possible. Let us know any questions! We also ask you to review all our pictures, our items come as presented in pictures. We normally answer our messages and emails within the same day. But some times due to the amount of calls, messages and emails we process during the day, we ask our customers to please be patient and allow 24 to 48 hours to process your messages. We want happy and returning customers! Crating and Special Packing Requirements; Crating, bubble wrap or a special setup, may incur extra charges. Please note that exchanges are not always available for every item we sell. Please keep all the elements of the package together as you received it and take clear pictures of the damage. Please allow 24 to 48 hours to document and process any case.

4/ 100 MM Tilting Rotary Table & Small Chuck, Back Plate, T Nuts USA Fulfilled






PRECISION QUALITY 4/ 100 MM TILTING MILLING INDEXING ROTARY TABLE WITH SMALL CHUCK, BACK PLATE & FIXING T NUTS BOLTS–METALWORKING ENGINEERING MACHINE TOOLS (WITH 65 MM 3 JAW SELF CENTERING). PRECISION QUALITY 4 /100 MM TILTING ROTARY MILLING INDEXING ROTARY TABLE. FEATURES TO TILT AND LOCKED AT ANY ANGLE FROM 0 TO 90 DEGREES. WORM GEAR RATION IS 1:36 WHICH MEANS THAT 1 HANDLE ROTATION SHALL TURN THE TABLE BY 10 DEGREES. SUPPLIED WITH A 65 MM 3 JAWS SELF CENTERING SMALL CHUCK WITH BACK PLATE & FIXING T NUTS BOLTS. TO USA AND WORLDWIDE. Please be aware that some countries may have local import regulations which restrict certain products from being imported. Listing and template services provided by inkFrog.

8 Rotary Table Palmgren

























8 Rotary Table Palmgren in excellent condition. Found in air conditioned machine shop tool room, has great patina requires little maintenance. Comes with sacrifice plate and hardware see photos.

Incoming search terms:
- 8 vertical palmgren rotary table
Rotary Table 4 100mm Horizontal And Vertical With 65mm 3 Jaw Chuck & Backplate







Rotary Table Slots: 4. Rotary Table Height: 2-1/16 (52mm). Table graduated in 360 Degrees. The scale calibrated in 5 degree increment. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. 3 Jaw Self Centering Chuck (65mm) Dia. 65mm Self Centering Chuck 3 Jaw. Jaws are made of tool steel, hardened & ground. Body is made of graded cast iron. KIT INCLUDES : ROTARY TABLE + CHUCK + BACKPLATE + T-NUTS. Our product is manufactured by us, we do not compromise on quality, the quality is the best you can ever get, kindly refer to the photos. We ensure the product reaches you at the earliest.

4 Inches 100 mm Horizontal Vertical Rotary Table 4 Slots for Milling Machine





The Metal : High quality 18 Gauge Mild Iron steel with Brass Accents. THIS NEAT LITTLE ROTARY TABLE, WITH A DIAMETER OF 100MM, CAN BE USED FOR A VARIETY OF MILLING, DRILLING AND MARKING OUT OPERATIONS IN THE HOME ENGINEER’S WORKSHOP. THERE ARE FOUR TEE SLOTS FOR SECURING THE WORK, FACES MACHINED AT RIGHT ANGLES FOR HORIZONTAL AND VERTICAL MOUNTING SLOTS FOR SECURING TO THE MACHINE TABLE. THE INDEXING HANDLE, WHICH ROTATES ONCE FOR EVERY TEN DEGREES OF TABLE ROTATION, IS SUBDIVIDED IN DEGREES AND QUARTER DEGREES. THE CENTRE HEIGHT WHEN MOUNTED VERTICALLY IS 40MM. SUPPLIED WITH WORK CLAMPING KIT. VERTICAL AND HORIZONTAL MOUNTING TEE SLOTS FOR SECURING WORK WHEEL MARKED IN DEGREES AND QUARTER DEGREES. A Precision work positioning device used in metalworking, enabling the operator to drill or cut work at exact intervals around a fixed axis. Rotary tables are most commonly mounted “flat”, with the table rotating around a vertical axis, in the same plane as the cutter of a vertical milling machine. An alternate setup is to mount the rotary table on its end (or mount it “flat” on a 90° angle plate), so that it rotates about a horizontal axis. In this configuration a tailstock can also be used, thus holding the work piece between centers. Horizontal/Vertical Rotary Tables are extremely useful accessories for a milling machine. Milling curved profiles and angled faces relative to a centre line. Drilling or milling to polar co-ordinates and, when mounted vertically with a tailstock they can be used to machine shafts or spindles. The versatile units can also be used on drilling, boring or slotting machines permitting an even greater range of operations. Machining – To establish the initial work piece position simply loosen the zero Collar locking handle and rotate the zero collar anti-clockwise for about half A turn. The worm is now disconnected from the worm wheel drive, the table is Free to turn independently to the crank handle and the work piece may now be Accurately aligned. To re-engage simply turn the zero collar in the clockwise Direction and re-tighten the locking handle. To machine spanner flats on a bolt. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. To create large-diameter holes, via milling in a circular tool path, on small milling machines that don’t have the power to drive large twist drills (>0.500/>13 mm). To cut complex curves (with proper setup). To cut straight lines at any angle. Vertical Center Height 2-1/16? Hand Wheel can be set to zero. Hand Wheel graduated in 10 min divisions. Cali berated in 5 min increment around the rim. Can be used both Horizontally & Vertically.

Vertical Horizontal Indexing Plate Rotary Table Milling Machi Indexing HeadHV-4




Name: Vertical and horizontal precision milling machine. (with index plate and flange). Choice: HV-4 with 80 chuck package. Center height: 85.5MM. Blessing ability: 2- 63MM. Supporting range: 25- 70MM. The smallest chuck can be clamped: 2mm. Maximum clamping capacity of the chuck: 60mm.
