Hv4_Rotary_Table_4_Slot_With_80mm_Self_Centering_Chuck_Backplate_01_ecz

Hv4 Rotary Table(4 Slot) With 80mm Self Centering Chuck & Backplate

Hv4 Rotary Table(4 Slot) With 80mm Self Centering Chuck & Backplate
Hv4 Rotary Table(4 Slot) With 80mm Self Centering Chuck & Backplate
Hv4 Rotary Table(4 Slot) With 80mm Self Centering Chuck & Backplate
Hv4 Rotary Table(4 Slot) With 80mm Self Centering Chuck & Backplate

Hv4 Rotary Table(4 Slot) With 80mm Self Centering Chuck & Backplate
With 80 mm Self Centering Chuck & Back plate. Rotary Table HV4 with 80 mm Self Centering Chuck & Back plate. Our Rotary Table HV4 is having a Table Diameter : 110 mm (4-3/8). Table Height: 80 mm (3 -1/8). Worm Gear Ratio – 1:90, which means that 1 handle rotation shall turn the table by 4 Degrees. Center Bore of the Table MT2. Table Graduated 360 Degrees. Hand wheel graduated in seconds. Vernier scale is ca liberated to 10 seconds. 2 Oiling Points for a direct lubrication of the Table for longer life & better performance. Can be clamped in Horizontal as well Vertical Position. It is combined with a high Quality 80 mm 3 Jaw Self centering chuck body made from SG Iron & Jaws are of Tool steel hardened & ground. A set of reversible jaws is supplied extra. Supplied with a mounting back plate, fixing tee nuts with screws, 80 mm Self Centering Chuck, Tailstock for HV4 and HV6, & Indexing Plate Set. Designed to fit our 3 or 4 Rotary table with either 3 or 4 slots. The Back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. The recess of the back plate is machined perfectly to fit the recess of the chuck to avoid any play. We reply within 24 hours. Transit times may vary particularly during peak periods. Thanks for Visiting our Store. The item “HV4 ROTARY TABLE(4 SLOT) WITH 80MM SELF CENTERING CHUCK & BACKPLATE” is in sale since Thursday, October 22, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
  • Setting Position: Horizontal/Vertical
  • Operation: Manual
  • MPN: Does Not Apply
  • Brand: Unbranded

Hv4 Rotary Table(4 Slot) With 80mm Self Centering Chuck & Backplate
80mm, backplate, centering, chuck, rotary, self, slot, table4
previous page · next page
HV6_ROTARY_TABLE_3Slot_TAILSTOCK_INDEXING_PLATES_SET_01_znw

HV6 ROTARY TABLE 3Slot+ TAILSTOCK + INDEXING PLATES SET

HV6 ROTARY TABLE 3Slot+ TAILSTOCK + INDEXING PLATES SET

HV6 ROTARY TABLE 3Slot+ TAILSTOCK + INDEXING PLATES SET
HV6 ROTARY TABLE+ TAILSTOCK + INDEXING PLATES SET. Vertical centre height 105mm. One turn = 4 degrees. Table graduated 360 degrees. Vernier scale is calibrated to 10 sec. Supplied with Dividing Plate Set for Indexing & a Tailstock for a total Indexing solution. Plate 1 – 15, 16, 17, 18, 19, 20. Plate 2 – 21, 23, 27, 29, 31, 33. Plate 3 – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. This Combination completes with TAILSTOCK, it is USED BETWEEN CENTRE to Center WORK IS REQUIRED. It is ADJUSTABLE FOR DIFFERENT HEIGHTS 80MM TO 110MM. The item “HV6 ROTARY TABLE 3Slot+ TAILSTOCK + INDEXING PLATES SET” is in sale since Tuesday, November 24, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
  • Setting Position: Horizontal/Vertical
  • Operation: Manual
  • MPN: Does Not Apply
  • Brand: Unbranded

HV6 ROTARY TABLE 3Slot+ TAILSTOCK + INDEXING PLATES SET
3slot, indexing, plates, rotary, table, tailstock
previous page · next page
Rotary_Table_Horizontal_Vertical_4_100mm_with_65mm_Lathe_Chuck_TAILSTOCK_01_xa

Rotary Table Horizontal & Vertical 4 / 100mm with 65mm Lathe Chuck & TAILSTOCK

Rotary Table Horizontal & Vertical 4 / 100mm with 65mm Lathe Chuck & TAILSTOCK
Rotary Table Horizontal & Vertical 4 / 100mm with 65mm Lathe Chuck & TAILSTOCK
Rotary Table Horizontal & Vertical 4 / 100mm with 65mm Lathe Chuck & TAILSTOCK
Rotary Table Horizontal & Vertical 4 / 100mm with 65mm Lathe Chuck & TAILSTOCK
Rotary Table Horizontal & Vertical 4 / 100mm with 65mm Lathe Chuck & TAILSTOCK

Rotary Table Horizontal & Vertical 4 / 100mm with 65mm Lathe Chuck & TAILSTOCK
Rotary Table Horizontal & Vertical 4 / 100 mm with. 65 mm Lathe Chuck & Back plate for Milling Machine. Vertical center Height : 2-1/16 (Approx 51 mm). Hand Wheel can be set to Zero. Hand Wheel Graduated in 10 Min Divisions. Calibrated in 5 Min Increment around the rim. Can be used both Vertical & Horizontal. This Tailstock is mostly used in between our Rotary Table 3″ , Rotary Table 3″ Tilting, Rotary Table 4″ , Rotary Table 4″ Tilting and Rotary Table 4 HV4 Models. It is used when between Centre Work is Required. These are adjustable for different hieghts & also having fine feed centre point and the centre tip is hardend and Ground. It is made up of good grade of cast iron. It is Very useful product to use. We reply within 24 hours. Transit times may vary particularly during peak periods. Thanks for Visiting our Store. The item “Rotary Table Horizontal & Vertical 4 / 100mm with 65mm Lathe Chuck & TAILSTOCK” is in sale since Thursday, October 22, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
  • Setting Position: Horizontal/Vertical
  • Tilting: No
  • Operation: Manual
  • MPN: Does Not Apply
  • Cross-Slide: No
  • Brand: Unbranded

Rotary Table Horizontal & Vertical 4 / 100mm with 65mm Lathe Chuck & TAILSTOCK
100mm, 65mm, chuck, horizontal, lathe, rotary, table, tailstock, vertical
previous page · next page
Rotary_table_6_Horizontal_Vertical_3_Slot_with_Adjustable_Tailstock_01_zezx

Rotary table 6 Horizontal & Vertical 3 Slot with Adjustable Tailstock

Rotary table 6 Horizontal & Vertical 3 Slot with Adjustable Tailstock

Rotary table 6 Horizontal & Vertical 3 Slot with Adjustable Tailstock
PRECISION ROTARY TABLE 6 3 Slot with Adjustable Tailstock. Manufactured from High grade seasones casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1. Horizontal Height : Approx 80mm from Base to Top surface of Chuck. Graduated 360 degree around its circumference. Tailstock for Rotary Table 6. It is an adjustable height tailstock used when you need to support a long part held in the rotary table- such as cutting a spline on a shaft. Precision made of heavy cast iron, it has a base for mounting to the mill table with T- bolts. Manufactured from Seasoned Grade Casting. Adjustable to Center Heights from 85 – 110 mm. The item “Rotary table 6 Horizontal & Vertical 3 Slot with Adjustable Tailstock” is in sale since Monday, November 9, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Other CNC, Metalworking & Manufacturing”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
  • Modified Item: No
  • MPN: Does Not Apply
  • Country/Region of Manufacture: India
  • Custom Bundle: No
  • Brand: Unbranded

Rotary table 6 Horizontal & Vertical 3 Slot with Adjustable Tailstock
adjustable, horizontal, rotary, slot, table, tailstock, vertical
previous page · next page
Hv4_Rotary_Table_4_Slot_Tailstock_Indexing_Plates_Set_M8_Clamping_Kit_Set_01_kqll

Hv4 Rotary Table (4 Slot)+ Tailstock + Indexing Plates Set, M8 Clamping Kit Set

Hv4 Rotary Table (4 Slot)+ Tailstock + Indexing Plates Set, M8 Clamping Kit Set
Hv4 Rotary Table (4 Slot)+ Tailstock + Indexing Plates Set, M8 Clamping Kit Set
Hv4 Rotary Table (4 Slot)+ Tailstock + Indexing Plates Set, M8 Clamping Kit Set
Hv4 Rotary Table (4 Slot)+ Tailstock + Indexing Plates Set, M8 Clamping Kit Set
Hv4 Rotary Table (4 Slot)+ Tailstock + Indexing Plates Set, M8 Clamping Kit Set

Hv4 Rotary Table (4 Slot)+ Tailstock + Indexing Plates Set, M8 Clamping Kit Set
HV4 ROTARY TABLE+ TAILSTOCK + INDEXING PLATES SET. High Precision and Smooth Rotation of Hand wheel. Table Diameter Is 110mm, Table Height 80mm, Centre Height 80mm. Centre Has a MT-2 Taper, Worm Gear Is 90-1. Vernier Scale Calibrated To 10 Seconds. Quick Release System for Manual Indexing. And Has 4 Tee Slots. Supplied with Dividing Plate Set for Indexing & a Tailstock for a total Indexing solution. Plate 1 – 15, 16, 17, 18, 19, 20. Plate 2 – 21, 23, 27, 29, 31, 33. Plate 3 – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. This Combination completes with TAILSTOCK, it is USED BETWEEN CENTRE to Center WORK IS REQUIRED. It is ADJUSTABLE FOR DIFFERENT HEIGHTS 80MM TO 110MM. These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. We reply within 24 hours. Transit times may vary particularly during peak periods. Thanks for Visiting our Store. The item “HV4 ROTARY TABLE (4 SLOT)+ TAILSTOCK + INDEXING PLATES SET, M8 CLAMPING KIT SET” is in sale since Thursday, October 22, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
  • Setting Position: Horizontal/Vertical
  • Operation: Manual
  • MPN: Does Not Apply
  • Brand: Unbranded

Hv4 Rotary Table (4 Slot)+ Tailstock + Indexing Plates Set, M8 Clamping Kit Set
clamping, indexing, plates, rotary, slot, table, tailstock
previous page · next page
Hv4_Rotary_Table_With_80mm_Chcuk_Tailstock_Backplate_Indexing_Plates_Set_01_jmxx

Hv4 Rotary Table With 80mm Chcuk, Tailstock, Backplate & Indexing Plates Set

Hv4 Rotary Table With 80mm Chcuk, Tailstock, Backplate & Indexing Plates Set
Hv4 Rotary Table With 80mm Chcuk, Tailstock, Backplate & Indexing Plates Set

Hv4 Rotary Table With 80mm Chcuk, Tailstock, Backplate & Indexing Plates Set
With 80 mm Self Centering Chuck, Backplate. Tailstock for HV4 and HV6 & Indexing Plate Set. Rotary Table HV4 with 80 mm Self Centering Chuck & Backplate. Our Rotary Table HV4 is having a Table Diameter : 110 mm (4-3/8). Table Height: 80 mm (3 -1/8). Worm Gear Ratio – 1:90, which means that 1 handle rotation shall turn the table by 4 Degrees. Centre Bore of the Table MT2. Table Graduated 360 Degrees. Handwheel graduated in seconds. Vernier scale is caliberated to 10 seconds. 2 Oiling Points for a direct lubrication of the Table for longer life & better performance. Can be clamped in Horizontal as well Vertical Position. It is combined with a high Quality 80 mm 3 Jaw Self centering chuck body made from SG Iron & Jaws are of Tool steel hardened & ground. A set of reversible jaws is supplied extra. Supplied with a mounting back plate, fixing tee nuts with screws, 80 mm Self Centering Chuck, Tailstock for HV4 and HV6, & Indexing Plate Set. Designed to fit our 3 or 4 Rotary table with either 3 or 4 slots. The Back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. The recess of the back plate is machined perfectly to fit the recess of the chuck to avoid any play. Fit to our HV4 and HV6, Tilting Rotary Tables 100 mm. Plate 1 – 15, 16, 17, 18, 19, 20. Plate 2 – 21, 23, 27, 29, 31, 33. Plate 3 – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. Tailstock for HV4 & HV6. Its made of good Quality of Cast Iron. Height is adjustable from 80 mm to 110 mm. It is used on our HV4 & HV6 ROTARY TABLE. It is USED WHEN BETWEEN CENTRE WORK IS REQUIRED. THESE ARE ADJUSTABLE FOR DIFFERENT HEIGHTS & Having fine feed centre point and the centre tip is hardened and Ground. We reply within 24 hours. Transit times may vary particularly during peak periods. Thanks for Visiting our Store. The item “HV4 ROTARY TABLE WITH 80MM CHCUK, TAILSTOCK, BACKPLATE & INDEXING PLATES SET” is in sale since Thursday, October 22, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
  • Setting Position: Horizontal/Vertical
  • Operation: Manual
  • MPN: Does Not Apply
  • Brand: Unbranded

Hv4 Rotary Table With 80mm Chcuk, Tailstock, Backplate & Indexing Plates Set
80mm, backplate, chcuk, indexing, plates, rotary, table, tailstock
previous page · next page
6_Rotary_table_Horizontal_Vertical_3_Slots_WithDividing_Indexing_Plate_set_01_ra

6 Rotary table Horizontal & Vertical (3 Slots) WithDividing/Indexing Plate set

6 Rotary table Horizontal & Vertical (3 Slots) WithDividing/Indexing Plate set
6 Rotary table Horizontal & Vertical (3 Slots) WithDividing/Indexing Plate set
6 Rotary table Horizontal & Vertical (3 Slots) WithDividing/Indexing Plate set
6 Rotary table Horizontal & Vertical (3 Slots) WithDividing/Indexing Plate set
6 Rotary table Horizontal & Vertical (3 Slots) WithDividing/Indexing Plate set

6 Rotary table Horizontal & Vertical (3 Slots) WithDividing/Indexing Plate set
Precision Rotary Table 6/150mm. With Dividing Plate Set. Manufactured from High grade seasones casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1. T Slot 16 mm. Horizontal Height : Approx 80 mm from Base to Top surface of Chuck. Plate’A’ – 15, 16, 17, 18, 19, 20. Plate’B’ – 21, 23, 27, 29, 31, 33. Plate’C’ – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. The item “6 Rotary table Horizontal & Vertical (3 Slots) WithDividing/Indexing Plate set” is in sale since Friday, November 6, 2020. This item is in the category “Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “easystreet_hangout” and is located in DASNA, UTTAR PRADESH. This item can be shipped worldwide.
  • Operation: Manual
  • Modified Item: No
  • MPN: Does Not Apply
  • Custom Bundle: No
  • Setting Position: Horizontal/Vertical
  • Cross-Slide: No
  • Tilting: No
  • Brand: Unbranded
  • Country/Region of Manufacture: India

6 Rotary table Horizontal & Vertical (3 Slots) WithDividing/Indexing Plate set
horizontal, plate, rotary, slots, table, vertical, withdividingindexing
previous page · next page
4_Rotary_Table_Tilting_Used_In_Horizontal_Vertical_3slot_01_jjg

4 Rotary Table Tilting Used In Horizontal & Vertical(3slot)

4 Rotary Table Tilting Used In Horizontal & Vertical(3slot)

4 Rotary Table Tilting Used In Horizontal & Vertical(3slot)
Horizontal/vertical Rotary Table Table height 66mm in flat position. Table graduated 360 degrees in 5 degree divisions. Base is 145mm x 126mm with two 10mm mounting holes separated by 110mm. The table tilts upto 90 degrees and can be used anywhere along the scale. The item “4 ROTARY TABLE TILTING USED IN HORIZONTAL & VERTICAL(3SLOT)” is in sale since Wednesday, November 25, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Other CNC, Metalworking & Manufacturing”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
  • Modified Item: No
  • Country/Region of Manufacture: India
  • Custom Bundle: No
  • MPN: Does Not Apply
  • Brand: Unbranded

4 Rotary Table Tilting Used In Horizontal & Vertical(3slot)
horizontal, rotary, table, tilting, used, vertical3slot
previous page · next page
Rotary_Table_4_100mm_Horizontal_Vertical_MT2_Bore_Model_Milling_Machine_3_Slots_01_cge

Rotary Table 4 100mm Horizontal Vertical MT2 Bore Model Milling Machine 3 Slots

Rotary Table 4 100mm Horizontal Vertical MT2 Bore Model Milling Machine 3 Slots
Rotary Table 4 100mm Horizontal Vertical MT2 Bore Model Milling Machine 3 Slots
Rotary Table 4 100mm Horizontal Vertical MT2 Bore Model Milling Machine 3 Slots

Rotary Table 4 100mm Horizontal Vertical MT2 Bore Model Milling Machine 3 Slots
Rotary Table 4 100mm Horizontal Vertical MT2 Bore Model Milling Machine 3 Slots. High Precision and Smooth Rotation of Hand wheel. Table Diameter Is 105 mm. Vertical center height 75 mm. One turn = 5 degrees table graduated 360 degrees. Center Has a MT-2 Taper. Quick Release System for Manual Indexing. And Has 3 Tee Slots. A Precision work positioning device used in metalworking, enabling the operator to drill or cut work at exact intervals around a fixed axis. Rotary tables are most commonly mounted “flat”, with the table rotating around a vertical axis, in the same plane as the cutter of a vertical milling machine. An alternate setup is to mount the rotary table on its end (or mount it “flat” on a 90° angle plate), so that it rotates about a horizontal axis. In this configuration a tailstock can also be used, thus holding the work piece between centers. Horizontal/Vertical Rotary Tables are extremely useful accessories for a milling machine. Milling curved profiles and angled faces relative to a centre line. Drilling or milling to polar co-ordinates and, when mounted vertically with a tailstock they can be used to machine shafts or spindles. The versatile units can also be used on drilling, boring or slotting machines permitting an even greater range of operations. Machining – To establish the initial work piece position simply loosen the zero Collar locking handle and rotate the zero collar anti-clockwise for about half A turn. The worm is now disconnected from the worm wheel drive, the table is Free to turn independently to the crank handle and the work piece may now be Accurately aligned. To re-engage simply turn the zero collar in the clockwise Direction and re-tighten the locking handle. To machine spanner flats on a bolt. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. To create large-diameter holes, via milling in a circular tool path, on small milling machines that don’t have the power to drive large twist drills (>0.500/>13 mm). To cut complex curves (with proper setup). To cut straight lines at any angle. Precision Mini Rotary Table 4 Inch or 100 mm is manufactured from Seasoned casting. Vertical center Height : 2-1/16. Hand Wheel can be set to Zero. Hand Wheel Graduated in 10 Min Divisions. In 3 Slots so you can put you Chuck on its easily. 3 T Slots for fixing work to easily clamp chucks. Can be used both Vertically & Horizontally. We ensure the product reaches you at the earliest. The item “Rotary Table 4 100mm Horizontal Vertical MT2 Bore Model Milling Machine 3 Slots” is in sale since Friday, September 4, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “baani_pk” and is located in Delhi, Delhi. This item can be shipped worldwide.
  • Country/Region of Manufacture: India
  • Setting Position: Horizontal/Vertical
  • MPN: Does Not Apply
  • Brand: Unbranded

Rotary Table 4 100mm Horizontal Vertical MT2 Bore Model Milling Machine 3 Slots
100mm, bore, horizontal, machine, milling, model, rotary, slots, table, vertical
previous page · next page
Hv4_Rotary_Table_4_Slot_With_Clamping_Kit_M8_01_dw

Hv4 Rotary Table(4 Slot) With Clamping Kit M8

Hv4 Rotary Table(4 Slot) With Clamping Kit M8
Hv4 Rotary Table(4 Slot) With Clamping Kit M8
Hv4 Rotary Table(4 Slot) With Clamping Kit M8

Hv4 Rotary Table(4 Slot) With Clamping Kit M8
HV4 ROTARY TABLE WITH CLAMPING KIT M6. ROTARY TABLE 4 (HV4). High Precision and Smooth Rotation of Hand wheel. Table Diameter Is 110 mm, Table Height 80 mm, Centre Height 80 mm. Centre Has a MT-2 Taper, Worm Gear Is 90-1. Vernier Scale Calibrated To 10 Seconds. Quick Release System for Manual Indexing. And Has 4 Tee Slots. CLAMPING KIT M 8. These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. We reply within 24 hours. Thanks for Visiting our Store. The item “HV4 ROTARY TABLE(4 SLOT) WITH CLAMPING KIT M8″ is in sale since Wednesday, October 7, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
  • Setting Position: Horizontal/Vertical
  • Operation: Manual
  • MPN: Does Not Apply
  • Brand: Unbranded

Hv4 Rotary Table(4 Slot) With Clamping Kit M8
clamping, rotary, slot, table4
previous page · next page