4 inch 100 mm Rotary Table Tilting Dividing Head &Adjustable Tilting Tailstock
4 inches 100mm Tilting 0°- 90° Rotary Table Milling Machine Tool. 4 100mm Tilting Rotary Table. Features to Tilt between 0 – 90 degrees and can be locked at any position. Table diameter 100mm table is graduated 360 degrees. Worm gear ratio 1:36 which means that 1 handle rotation shall turn the table by 10 degrees. Centre height in vertical position: 2-5/8 (66mm approx) hand wheel is graduated in division of 10 minuend can be set at Zero. Can be mounted in Horizontal & Vertical position. Tip hardness [HRC] 40 – 45. Material tip C45E steel. Net weight [kg] 2.4. Center height [mm] 45 – 80. Tip Ø [mm] 15. Dimensions base [mm] 140 X 57. Total height [mm] 155. Thanks to the height-adjustable tip, this tailstock is suitable for dividing heads whose center of the rotary table is between 45 and 80 mm in a vertical position. In order to achieve a horizontal alignment of the workpiece, it is clamped between the dividing head and the tailstock. The tailstock center is fixed at the set height using a clamping screw, and the horizontal position of the center can also be secured by clamping. The lateral adjustment of the centering tip is made possible by a knurled rotary knob. The horizontal travel of the tip is 27 mm.