4 / 100mm 4 Slot Rotary Table Horizontal / Vertical
4 / 100MM 4 SLOT ROTARY TABLE HORIZONTAL / VERTICAL. Rotary table – A Precision work positioning device used in metalworking, enabling the operator to drill or cut work at exact intervals around a fixed axis. Rotary tables are most commonly mounted “flat”, with the table rotating around a vertical axis, in the same plane as the cutter of a vertical milling machine. An alternate setup is to mount the rotary table on its end (or mount it “flat” on a 90° angle plate), so that it rotates about a horizontal axis. In this configuration a tailstock can also be used, thus holding the work piece between centers. 4 inch ROTARY TABLE- CHUCK DIAMETER 4 inch-100 mm. 2-1/16 (approx 51mm) CENTRE HIGHT IN VERTICAL POSITION. 2- 1/16 inch (approx 51mm). TABLE CALIBRATED 0-360 DEGREES. Horizontal/Vertical Rotary Tables are extremely useful accessories for a milling machine. Machining – Milling curved profiles and angled faces relative to a centre line. Drilling or milling to polar co-ordinates and, when mounted vertically with a tailstock they can be used to machine shafts or spindles. The versatile units can also be used on drilling, boring or slotting machines permitting an even greater range of operations. Machining – To establish the initial work piece position simply loosen the zero Collar locking handle and rotate the zero collar anti-clockwise for about half A turn. The worm is now disconnected from the worm wheel drive, the table is Free to turn independently to the crank handle and the work piece may now be Accurately aligned. To re-engage simply turn the zero collar in the clockwise Direction and re-tighten the locking handle. A rotary table can be used. To machine spanner flats on a bolt. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. To create large-diameter holes, via milling in a circular tool path, on small milling machines that don’t have the power to drive large twist drills (>0.500/>13 mm). To cut complex curves (with proper setup). To cut straight lines at any angle. Every feedback is very valuable to us. The item “4 / 100MM 4 SLOT ROTARY TABLE HORIZONTAL / VERTICAL” is in sale since Monday, March 11, 2019. This item is in the category “Industrial\CNC, Metalworking & Manufacturing\Metalworking Supplies\Other Metalworking Supplies”. The seller is “fairdeals_365″ and is located in NEW DELHI, DL. This item can be shipped worldwide.
- MPN: Does Not Apply
- Brand: Unbranded
- Item Type: Rotary Table
- Product Type: ROTARY TABLE