Rotary Table 4 Inch/100 mm 3 Slot H-V MT2 Bore + MT2 Arbour + 70mm 4 jaw chuck
Rotary Table 4 100mm Horizontal Vertical MT2 Bore Model Milling Machine 70mm Independent Chuck 4 Slots. High Precision and Smooth Rotation of Hand wheel. Table Diameter Is 105 mm. Vertical center height 75 mm. One turn = 5 degrees table graduated 360 degrees. Center Has a MT-2 Taper. Quick Release System for Manual Indexing. And Has 3 Tee Slots. A Precision work positioning device used in metalworking, enabling the operator to drill or cut work at exact intervals around a fixed axis. Rotary tables are most commonly mounted “flat”, with the table rotating around a vertical axis, in the same plane as the cutter of a vertical milling machine. An alternate setup is to mount the rotary table on its end (or mount it “flat” on a 90° angle plate), so that it rotates about a horizontal axis. In this configuration a tailstock can also be used, thus holding the work piece between centers. Horizontal/Vertical Rotary Tables are extremely useful accessories for a milling machine. Milling :Milling curved profiles and angled faces relative to a centre line. Drilling or milling to polar co-ordinates and, when mounted vertically with a tailstock they can be used to machine shafts or spindles. The versatile units can also be used on drilling, boring or slotting machines permitting an even greater range of operations. Machining – To establish the initial work piece position simply loosen the zero Collar locking handle and rotate the zero collar anti-clockwise for about half A turn. The worm is now disconnected from the worm wheel drive, the table is Free to turn independently to the crank handle and the work piece may now be Accurately aligned. To re-engage simply turn the zero collar in the clockwise Direction and re-tighten the locking handle. Rotary table can be used for. To machine spanner flats on a bolt. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. To create large-diameter holes, via milling in a circular tool path, on small milling machines that don’t have the power to drive large twist drills (>0.500/>13 mm). To cut complex curves (with proper setup). To cut straight lines at any angle. Product Specifications : Atoz adjustable hand reamers are designed with enough adjustment to ream almost any odd size hole. Blades are made of carbon steel. For long life and can be adjusted by loosening one nut while tightening the other. They are used mostly for repair work in the field. Photo for representation purpose only. May not be as the same as displayed. Please ask for original photos if required. The item “Rotary Table 4 Inch/100 mm 3 Slot H-V MT2 Bore + MT2 Arbour + 70mm 4 jaw chuck” is in sale since Wednesday, June 30, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “atoz-outils” and is located in Bagdad, Kentucky. This item can be shipped to United States.
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- Tilting: No
- Model: RT-4+100MM + 70mm Chuck
- MPN: Does Not Apply
- Brand: Atoz