Rotary Table Horizontal Vertical Tilting 4, 3 + 65mm Chuck + 80mm Round Vice
(A) 3 / 80mm Rotary Table Horizontal Vertical 4 Slots. Table: 3 Diameter or 80mm. Table Height: 1 5/8. Center Height in Vertical Position: 1. Operates in the Horizontal or Vertical position. Hand Wheel calibrated to 10 degrees per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. (B) 3 / 80mm Tilting 4 slots. Of Slots : 4 Slots. Features to tilts between 0- 90 Degrees & can be locked at any position. Table is graduated 360 Degrees. (C) 4 / 100mm Rotary Table Horizontal Vertical 4 Slots. Table 4 / 100mm manufactured for effective work. 4 T Slots for fixing work can be used with Clamping kit. Vertical Height 55 mm when table kept horizontal. Table graduated 0-360 degrees in 5 degree divisions. (D) 4 / 100mm Rotary Table Tilting 4 Slots. Table diameter 100 mm. Worm Gear Ratio -1:36, which means that the 1 handle rotation turns the table by 10 Degrees. Centre Height in vertical position: 2-5/8 (66 mm approx). Hand wheel is graduated in divisions of 10 min & can be set to zero. (E) 4 / 100mm Rotary Table Tilting 3 Slots. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Center Height in vertical position: 2-5/8 (66 mm approx). Hand wheel is graduated in divisions of 10 min. (F) 65mm Lathe Chuck Self – Centering 3 jaw. Quality 3 jaw self centering chuck 65mm Diameter with. Contra rotating rapid jaw adjustment mechanism. (G) 80mm Round Vice. Diameter of Base : 80 mm. Jaw Width : 54 mm. Jaw Depth: 20 mm. Jaw Opening : 32 mm. Made of high grade close grain caste Iron. The moving jaw has V-grooves to hold Round objects. Again these vices are drilled in a manner that these can fit to a 3 as well 4 slot table. The Drills are counter bored to ensure that the fixing screws sets perfectly ensure perfect movement. 3 / 80mm Rotary Table Horizontal Vertical 4 Slots +. 65mm Lathe Chuck Self – Centering 3 jaw. (A) + (F) + (G). 3 / 80mm Tilting 4 slots. (B) + (G) 3 / 80mm Tilting 4 slots + 80mm Round Vice (B) + (F) + (G). (C) + (F) 4″ / 100mm Rotary Table Horizontal Vertical 4 Slots + 65mm Lathe Chuck Self – Centering 3 jaw (C) + (G) 4″ / 100mm Rotary Table Horizontal Vertical 4 Slots + 80mm Round Vice (C) + (F) + (G). 4 / 100mm Rotary Table Horizontal Vertical 4 Slots +. (D) + (F) 4″ / 100mm Rotary Table Tilting 4 Slots + 65mm Lathe Chuck Self – Centering 3 jaw (D) + (G) 4″ / 100mm Rotary Table Tilting 4 Slots + 80mm Round Vice (D) + (F) + (G). 4 / 100mm Rotary Table Tilting 4 Slots. 4 / 100mm Rotary Table Tilting 3 Slots. (E) + (G) 4 / 100mm Rotary Table Tilting 3 Slots + 80mm Round Vice (E) + (F) + (G). A Precision work positioning device used in metalworking, enabling the operator to drill or cut work at exact intervals around a fixed axis. Rotary tables are most commonly mounted “flat”, with the table rotating around a vertical axis, in the same plane as the cutter of a vertical milling machine. An alternate setup is to mount the rotary table on its end (or mount it “flat” on a 90° angle plate), so that it rotates about a horizontal axis. In this configuration a tailstock can also be used, thus holding the work piece between centers. Horizontal/Vertical Rotary Tables are extremely useful accessories for a milling machine. Milling curved profiles and angled faces relative to a centre line. Drilling or milling to polar co-ordinates and, when mounted vertically with a tailstock they can be used to machine shafts or spindles. The versatile units can also be used on drilling, boring or slotting machines permitting an even greater range of operations. Machining – To establish the initial work piece position simply loosen the zero Collar locking handle and rotate the zero collar anti-clockwise for about half A turn. The worm is now disconnected from the worm wheel drive, the table is Free to turn independently to the crank handle and the work piece may now be Accurately aligned. To re-engage simply turn the zero collar in the clockwise Direction and re-tighten the locking handle. To machine spanner flats on a bolt. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. To create large-diameter holes, via milling in a circular tool path, on small milling machines that don’t have the power to drive large twist drills (>0.500/>13 mm). To cut complex curves (with proper setup). To cut straight lines at any angle. PROUDLY MADE IN INDIA. Atoz Tools comprises of a dedicated and skilled team of engineers with an aim of providing you tools of highest indian industrial standards. Situated at the industrial hub of india we specialize in providing complete tooling solutions. Our Motto : Right Quality. We ensure the product reaches you at the earliest. We are looking forward to your positive reviews and to build a long term relationship. The item “Rotary Table Horizontal Vertical Tilting 4, 3 + 65mm Chuck + 80mm Round Vice” is in sale since Wednesday, November 28, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Other Workholding”. The seller is “atoz.tools” and is located in GURGAON, HARYANA. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia.
- Brand: ATOZ
- Type: Rotary Table HV & Tilting
- Jaw Width: 3″ & 4″
- Country/Region of Manufacture: India
- Packaging: Lubricated, Bubble wrapped
- Handling Time: 1 Business Day
- Quality: PREMIUM
- Manufacturer Part Number: Does Not Apply