Rotary Table 3 (80mm) Horizontal & Vertical + 65mm Lathe Chuck + Backplate
Supplied complete with a key as well as set of tee nuts and studs to secure it into place. Table Height: 1 5/8. Center Height in Vertical Position: 1. Operates in the Horizontal or Vertical position. Hand Wheel calibrated to 10 degrees per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. Quality 3 jaw self centering chuck 65mm Diameter. Contra rotating rapid jaw adjustment mechanism. Backplate is drilled and counterbored to fit a range of 3″ and 4″ rotary tables with 4 Slots. Horizontal/Vertical Rotary Tables are extremely useful accessories for a milling machine. Milling :Milling curved profiles and angled faces relative to a centre line. Drilling or milling to polar co-ordinates and, when mounted vertically with a tailstock they can be used to machine shafts or spindles. The versatile units can also be used on drilling, boring or slotting machines permitting an even greater range of operations. Machining – To establish the initial work piece position simply loosen the zero Collar locking handle and rotate the zero collar anti-clockwise for about half A turn. The worm is now disconnected from the worm wheel drive, the table is Free to turn independently to the crank handle and the work piece may now be Accurately aligned. To re-engage simply turn the zero collar in the clockwise Direction and re-tighten the locking handle. Rotary table can be used for. To machine spanner flats on a bolt. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. To create large-diameter holes, via milling in a circular tool path, on small milling machines that don’t have the power to drive large twist drills (>0.500/>13 mm). To cut complex curves (with proper setup). To cut straight lines at any angle. Please do not file Item Not Received Case or Item Not as Described Case. Don’t get confused with Manufacturing date and expiry date. Date format used in India is DD / MM / YYYY. Expiry Date : 7 Month Later From the Manufacture Date / On Pack Manufacture Date is Mention. These charges are normally collected. Indian merchants are unable to. Price or mark international parcels as “gifts”. Indian and international government regulations prohibit such practices.