4jaw
4/100 MM Rotary Table+horizontal Vertical+tailstock+round Vice+70mm 4jaw Inde
Description of 4 (100 mm) Rotary Table Designed for smaller milling machines. Table diameter 100 mm Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Center Height in vertical position: 2-1/16 (50 mm approx). Hand wheel is graduated in divisions of 10 min & can be set to zero. Can be mounted both in Horizontal & vertical position. ETAILS OF ROUND VICE: Made of high grade close grain caste Iron. The moving jaw has V-grooves to hold Round objects. Again these vices are drilled in a manner that these can fit to a 3 as well 4 slot table. The Drills are counter bored to ensure that the fixing screws sets perfectly ensure perfect movement. Supplied with a Suitable Tailstock, Clamp kit & a Chuck with Back Plate & Fixing T nuts BODY OF THE CHUCK IS GRADED CASTE IRON. JAWS ARE HARDENED STEEL. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “toolswholesale” and is located in this country: IN. This item can be shipped worldwide.
- Brand: Unbranded
Horizontal Vertical Milling Indexing 4/100 Rotary Table+tailstock 50mm 4jaw
4 (100 mm) Rotary Table Designed for smaller milling machines. Table diameter 100 mm Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Center Height in vertical position: 2-1/16 (50 mm approx) excluding chuck. Hand wheel is graduated in divisions of 10 min & can be set to zero. Can be mounted both in Horizontal & vertical position. Supplied with 50 mm 4 Jaws Self Centering Chuck, made from High Quality chuck, the body of which is made from SG Iron & Jaws are of Tool steel hardened & ground. Supplied with a mounting back plate & fixing tee nuts with screws. The Back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. A Tool Steel Back Plate is supplied with Fixing T nuts to Mount the Chuck on It. Back Plate is Drill in a manner that it will fit both 3 as well as 4 slots Table. The Back side of the Plate has a locating Spigot to center the Mounting on to the Table. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “toolswholesale” and is located in this country: IN. This item can be shipped worldwide.
- Brand: Unbranded
Rotary Table 6/150mm + 4jaw Indep. Chuck + Back & Dividing Plate Tail-stock
Integrates of Rotary Kit. Rotary Table 6/150 mm. 2 4 Jaw Chuck Independent chuck with Back Plate 100mm. Weight of Kit :- 21 Kgs / 46.2 Lbs. Gear Ratio:- 90:1. The 4 jaw chuck has a big range clamping. The chuck has 4 reversible jaws and. Jaw can be moved independently. There is a fixture plate on which the chuck is mounted. These chucks ideal for gripping non-circular cross sections and gripping circular cross sections with extreme precision. Height can be varied while working with different index centres while the angle of inclination can be changed for various machining applications. The tip of centre is finely rotatable. The dead centre of the tail stock should be in line with the centre of the rotary table. Tail stock suitable for 6″ & 4.5/16″ Rotary Table. Uses of Tail stock. Used as part of an engineering lathe. Wood-turning lathe, or used in conjunction with a. On a milling machine. Usually used to apply support to the longitudinal. Axis of a work piece being machined. Is mounted in the tail stock, and inserted against the sides of a hole in the. A tail stock has a Dead. A Tail stock is particularly useful when the work-piece is relatively long and slender. 6.1/4 / 108mm. 3.3/16 / 80mm. The divisions of preset holes are provided for the most common angles such as 30, 45 and 90. The remaining divisions of the circle are provided for manually rotating the dividing arm using the plates. M8 Set of 10 pcs. The item “Rotary Table 6/150mm + 4jaw Indep. Chuck + Back & Dividing Plate Tail-stock” is in sale since Thursday, June 25, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial-tools” and is located in Delhi, Delhi. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- Tilting: No
- Rotary table: 6″ 150mm
- chuck size: 100mm
- weight: approx 22 kg
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded
New Toolman Rotary Table 3/75mm 4jaw Chuck with Back Plate Tail Stock Clamp Set
Integrates of Rotary Kit. Rotary Table 3/75 mm. 2 4 Jaw Chuck with Back Plate 70 mm. Weight of Kit :- 6 Kgs / 13.2 Lbs. Chuck Size :- 70 mm. Center Height Max:- 6.1/4 / 108 mm. Center Height Mini:- 3.3/16 / 80 mm. Gear Ratio:-36:1. Precision ground horizontally and vertically. Graded cast iron and precision ground. The work table is graduated to full 360°. Gear Ratio 36:1. Uses of Rotary Table. Is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed. A rotary table can be used. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. Create large-diameter holes, via Milling in a circular toolpath, on small milling machines. To cut straight lines &. The 4 jaw chuck has a big range clamping. The chuck has 4 reversible jaws. There is a fixture plate on which the chuck is mounted. Height can be varied while working with different index centers while the angle of inclination can be changed for various machining applications. The tip of center is finely rotatable. The dead center of the tail stock should be in line with the center of the rotary table. Tail stock suitable for 3″ /75 mm” Rotary Table. Uses of Tail stock. Used as part of an engineering lathe. Ood-turning lathe, or used in conjunction with a rotary table. On a milling machine. Usually used to apply support to the longitudinal Ro. Axis of a work piece being machined. Center is mounted in the tail stock, and inserted against the sides of a hole in the. Of the work piece. A tail stock has a Dead center , while. A Tail stock is particularly useful when the work piece is relatively long and slender. Term & Conditions. The color of item can be vary depend upon availability. The item “New Toolman Rotary Table 3/75mm 4jaw Chuck with Back Plate Tail Stock Clamp Set” is in sale since Monday, March 18, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tool-supplier” and is located in DELHI, DELHI. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Weight of Kit: 6 Kgs/ 13.2 Lbs
- Chuck Size: 70 MM
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded
Hv6 Rotary Table(4 Slot) With Indexing Plate Set & 150mm 4jaw Independent Chuck
Precision Rotary Table 6/150mm. With Dividing Plate Set &. 150mm 4 Jaw Independent Chuck. Manufactured from High grade seasones casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1. T Slot 16 mm. Horizontal Height : Approx 80 mm from Base to Top surface of Chuck. Plate’A’ – 15, 16, 17, 18, 19, 20. Plate’B’ – 21, 23, 27, 29, 31, 33. Plate’C’ – 37, 39, 41, 43, 47, 49. Comes complete with Necessary Screws, Washers & handles. 150 mm Independent Chuck & Backplate. A high Quality 4 Jaw Independent chuck, the body of chuck is made from SG Iron & Jaws are of Tool steel hardened & ground. Same Jaws are reversible as well. We reply within 24 hours. Thanks for Visiting our Store. The item “HV6 ROTARY TABLE(4 SLOT) WITH INDEXING PLATE SET & 150MM 4JAW INDEPENDENT CHUCK” is in sale since Wednesday, October 7, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “industrial_hobbist” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Setting Position: Horizontal/Vertical
- Operation: Manual
- MPN: Does Not Apply
- Brand: Unbranded
New Rotary Table 3/75mm, 4jaw Chuck Self Centring with Back Plate Set, Clamping
Integrates of Rotary Kit. Rotary Table 3/75 mm. 2 4 Jaw Chuck Self Centering with Back Plate 70mm. Weight of Kit :- 3.8 Kgs / 8.36 Lbs. Chuck Size:- 70mm. Precision ground horizontally and vertically. Graded cast iron and precision ground. The work table is graduated to full 360 degrees. Gear Ratio 36:1. Uses of Rotary Table. Is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed. A rotary table can be used. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. Create large-diameter holes, via milling in a circular toolpath, on small milling machines. To cut straight lines &. The 4 jaw chuck has a big range clamping. The chuck has 4 reversible jaws. There is a fixture plate on which the chuck is mounted. The colour of item can be vary depend upon availability. The item “New Rotary Table 3/75mm, 4jaw Chuck Self Centring with Back Plate Set, Clamping” is in sale since Monday, March 18, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tool-supplier” and is located in DELHI, DELHI. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
- California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Modified Item: No
- Chuck size: 4 Jaw Chuck Self Centering 70 mm plate
- Country/Region of Manufacture: India
- Weight of Kit: 3.8 Kgs / 8.36 Lbs
- Operation: Manual
- Brand: Unbranded
New Rotary Table 8/200mm, Dividing Plates, Tail Stock, 4Jaw Chuck Indepd. & Clamps
Integrates of Rotary Kit. Rotary Table 8/200 mm. 4 Jaw Chuck independent chuck with Back Plate 125mm. Weight of Kit :- 48 Kgs / 105.6 Lbs. Made of ductile cast iron and precision ground The worktable is graduated to a full 360° MT 3 center for holding work pieces worm gear ration is 90:1 making one turn of the handle move the table 4° vernier scale makes setting down to 10 secs possible quick release system for manual indexing. Uses of Rotary Table. Is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed. A rotary table can be used. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. Create large-diameter holes, via milling in a circular toolpath, on small milling machines. To cut straight lines &. The 4 jaw chuck has a big range clamping. The chuck has 4 reversible jaws and. Jaw can be moved independently. There is a fixture plate on which the chuck is mounted. These chucks ideal for gripping non-circular cross sections and gripping circular cross sections with extreme precision. Height can be varied while working with different index centers while the angle of inclination can be changed for various machining applications. The tip of center is finely rotatable. The dead center of the tail stock should be in line with the center of the rotary table. Tail stock suitable for 8″ /200mm” Rotary Table. 8 / 200mm. 4.3/4 / 120mm. Uses of Tail stock. Used as part of an engineering lathe. Wood-turning lathe, or used in conjunction with a rotary table. Usually used to apply support to the longitudinal Ro. Axis of a work-piece being machined. Is mounted in the tail stock, and inserted against the sides of a hole in the center of the work-piece. A tail stock has a Dead center. Head Stock has Live Center. A Tail stock is particularly useful when the work-piece is relatively long and slender. The divisions of preset holes are provided for the most common angles such as 30, 45 and 90. The remaining divisions of the circle are provided for manually rotating the dividing arm using the plates. Term & Conditions. The color of item can be vary depend upon availability. The item “New Rotary Table 8/200mm, Dividing Plates, Tail Stock, 4Jaw Chuck Indepd. & Clamps” is in sale since Monday, March 18, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tool-supplier” and is located in DELHI, DELHI. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
- California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Modified Item: No
- Country/Region of Manufacture: India
- Operation: Manual
- Weight Of Kit: 48 Kgs / 105.6 Lbs
- Brand: Unbranded
New Rotary Table 6/150mm, 4jaw Indep. Chuck with Back & Dividing Plate Tailstock
Integrates of Rotary Kit. Rotary Table 6/150 mm. 2 4 Jaw Chuck Independent chuck with Back Plate 100mm. Weight of Kit :- 21 Kgs / 46.2 Lbs. Gear Ratio:- 90:1. Made of ductile cast iron and precision ground The worktable is graduated to a full 360° MT 2 centre for holding work pieces worm gear ration is 90:1 making one turn of the handle move the table 4° vernier scale makes setting down to 10 secs possible quick release system for manual indexing. Uses of Rotary Table. Is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed. A rotary table can be used. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. Create large-diameter holes, via milling in a circular toolpath, on small milling machines. To cut straight lines &. The 4 jaw chuck has a big range clamping. The chuck has 4 reversible jaws and. Jaw can be moved independently. There is a fixture plate on which the chuck is mounted. These chucks ideal for gripping non-circular cross sections and gripping circular cross sections with extreme precision. Height can be varied while working with different index centres while the angle of inclination can be changed for various machining applications. The tip of centre is finely rotatable. The dead centre of the tail stock should be in line with the centre of the rotary table. Tail stock suitable for 6″ & 4.5/16″ Rotary Table. Uses of Tail stock. Used as part of an engineering lathe. Wood-turning lathe, or used in conjunction with a. On a milling machine. Usually used to apply support to the longitudinal. Axis of a work-piece being machined. Centre is mounted in the tail stock, and inserted against the sides of a hole in the centre of the work piece. A tail stock has a Dead. A Tail stock is particularly useful when the work-piece is relatively long and slender. 6.1/4 / 108mm. 3.3/16 / 80mm. The divisions of preset holes are provided for the most common angles such as 30, 45 and 90. The remaining divisions of the circle are provided for manually rotating the dividing arm using the plates. Term & Conditions. The colour of item can be vary depend upon availability. The item “New Rotary Table 6/150mm, 4jaw Indep. Chuck with Back & Dividing Plate Tailstock” is in sale since Monday, March 18, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tool-supplier” and is located in DELHI, DELHI. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
- California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Modified Item: No
- Country/Region of Manufacture: India
- Operation: Manual
- Rotary Table: 6”/150mm
- Weight Of Kit: 21 Kgs / 46.2 Lbs
- Gear Ratio: 90:1
- Chuck Size: 100mm
- Brand: Unbranded
New Rotary Table 4/100 mm kit 4Jaw Chuck with Back Plate Tail Stock &Clamps Set
Integrates of Rotary Kit. Rotary Table 4/100 mm. 2 4 Jaw Chuck with Back Plate 80 mm. Weight of Kit :- 9 Kgs / 19.8 Lbs. Chuck Size :- 80 mm. 3.3/8 / 85 mm. 1.1/2 / 38 mm. Precision ground horizontally and vertically. Graded cast iron and precision ground. The work table is graduated to full 360 degrees. Gear Ratio 36:1. Uses of Rotary Table. Is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed. A rotary table can be used. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. Create large-diameter holes, via milling in a circular toolpath, on small milling machines. To cut straight lines &. The 4 jaw chuck has a big range clamping. The chuck has 4 reversible jaws. There is a fixture plate on which the chuck is mounted. Height can be varied while working with different index centers while the angle of inclination can be changed for various machining applications. The tip of center is finely rotatable. The dead center of the tail stock should be in line with the center of the rotary table. Tail stock suitable for 4″ /100 mm” Rotary Table. Uses of Tail stock. Used as part of an engineering lathe. Wood-turning lathe, or used in conjunction with a rotary table. On a milling machine. Usually used to apply support to the longitudinal Ro. Axis of a work piece being machined. Is mounted in the tail stock, and inserted against the sides of a hole in the center of the work piece. A tail stock has a Dead Center, while. A Tail stock is particularly useful when the work piece is relatively long and slender. Term & Conditions. The colour of item can be vary depend upon availability. The item “New Rotary Table 4/100 mm kit 4Jaw Chuck with Back Plate Tail Stock &Clamps Set” is in sale since Friday, March 29, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tool-supplier” and is located in DELHI, DELHI. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
- California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Modified Item: No
- Country/Region of Manufacture: India
- Weight of Kit: 9 Kgs / 19.8 Lbs
- Operation: Manual
- Chuck Size: 80 MM
- Brand: Unbranded
New Tilting Rotary Table 4/100 mm kit 4jaw Chuck with Back Plate & Clamping Set
Integrates of Rotary Kit. Rotary Table Tilting Type 4/100 mm. 2 4 Jaw Chuck with Back Plate 80 mm. Weight of Kit :- 8.2 Kgs / 18.04 Lbs. Chuck Size :- 80 mm. Gear Ratio:- 36:1. Precision ground horizontally and vertically. Graded cast iron and precision ground. The work table is graduated to full 360°. Gear Ratio 36:1. Tilting type Rotary Table can be use angular setting. Uses of Rotary Table. Is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed. A rotary table can be used. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. Create large-diameter holes, via milling in a circular toolpath, on small milling machines. To cut straight lines &. The 4 jaw chuck has a big range clamping. The chuck has 4 reversible jaws. There is a fixture plate on which the chuck is mounted. The colour of item can be vary depend upon availability. The item “New Tilting Rotary Table 4/100 mm kit 4jaw Chuck with Back Plate & Clamping Set” is in sale since Friday, March 29, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tool-supplier” and is located in DELHI, DELHI. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
- California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
- Tilting: Yes
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- MPN: Does Not Apply
- Weight of kit: 8.2 Kgs / 18.04 Lbs
- Modified Item: No
- Gear Ratio:: 36:1
- Country/Region of Manufacture: India
- Operation: Manual
- Rotary Table: 4”/100mm
- Chuck Size: 80 MM
- Brand: Unbranded