adaptor
4”/100mm Regular Rotary Milling Table ER Collet Adaptor with M6 Clamp Kit- USA
4”/100mm Regular Rotary Milling Table ER Collet Adaptor with M6 Clamp Kit. A rotary table is a precision tool used predominantly in metalworking, particularly in machining operations like milling and drilling. Its primary function lies in enabling machining at precise angular intervals around a fixed point, commonly referred to as indexing. This capability facilitates the creation of intricate geometries, circular features, and multi-sided machining without the need for manual repositioning of the workpiece. A clamp kit for a rotary table is used to secure workpieces onto the rotary table during machining operations. Rotary tables are often used in machining setups to enable circular cutting, hole drilling, and other operations around a fixed axis of rotation. 360-Degree Graduation: The table is graduated a full 360 degrees, allowing for precise control and positioning of the workpiece. The clear markings ensure easy and accurate angle setting for all your milling tasks. Worm Gear Ratio: 1:36 The gear ratio means that one full rotation of the handle turns the table by 10 degrees, providing fine control over the movement and ensuring precision in every operation. Vertical Position Center Height: 2-1/16 (50 mm approx) The center height in the vertical position is 2-1/16 inches, which aligns perfectly with the smaller milling machine setups, offering versatility in workpiece positioning. Handwheel Graduations: The handwheel is graduated in divisions of 10 minutes, allowing for highly detailed adjustments. The scale can also be set to zero, making it easy to track and repeat your adjustments for consistent results. Mounting Flexibility: The Regular model can be mounted in both horizontal and vertical positions, enhancing its versatility for a wide range of applications. Whether you need flat or angled cuts, this rotary table can handle it with ease. This M6 clamp kit is designed for use with 3″ or 4″ rotary tables. Includes a set of clamps, bolts, nuts, and T-slot nuts. Compatible with rotary tables featuring M6 T-slots or mounting holes. Allows for secure fastening of workpieces onto the rotary table during machining operations. Made of tool steel for durability and reliability. Provides essential holding power to maintain precision and accuracy. Ideal for use in machining setups requiring precise rotary table positioning. ER COLLET ADAPTOR. ER Collet adaptor designed for small milling rotary tables. Offers exceptional accuracy of under 5 microns. Compatible with 3″ (80 mm) and 4″ (100 mm) rotary tables. Includes fixing T nuts for secure attachment. Epoxy black finish provides rust resistance and durability. Base plate fits both 3-slot and 4-slot rotary tables seamlessly. Features a 13.9 mm diameter locating spigot for precise centering.
3/80 mm Regular Rotary Milling Table ER 16 Collet Adaptor with M6 Clamp Kit
ROTARY TABLE 3/80 MM WITH ER16 COLLET ADAPTOR, M6 CLAMP KIT, ROUND VICE, TAILSTOCK & 65 mm 3 JAW SELF CENTERING M14 X 1 THREADED CHUCK WITH BACK PLATE & FIXING TNUTS. A rotary table is a precision tool used in machining operations, primarily for rotating a workpiece around a fixed axis, allowing for the accurate machining of circular features, angular positioning, and dividing work into equal sections. 3 (80 MM) Rotary Table 4 Slots. Table Height: 1 5/8. Center Height in Vertical Position: 1. Operates in the Horizontal or Vertical position. Hand Wheel calibrated to 10 degrees per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. ROUND VISE 3(80 MM). Made form Quality close grain Caste Iron -Designed to fit our 3″ (80 mm) & 4″ (100 mm) Rotary Tables. Diameter of Base : 80 mm. Jaw Width : 54 mm Jaw Depth: 20 mm Jaw Opening : 32 mm Height : 29 mm. These vices are counter- drilled in a manner that these can fit to a 3 as well 4 slot table. The moving jaw has V-grooves to hold Round objects. Precisely Ground on Base, Top, Jaws & Base. Rest Body is painted for a long rust free life. M6 CLAMP KIT. Made of high quality tool steel. These are polished & ground from all sides. Sets includes 2 clamps, 2 blocks, screw of m6 thread with 2 flange nuts & 2 tee-nuts. ER COLLET ADAPTOR. ER16 Collet adaptor designed for small milling rotary tables. Offers exceptional accuracy of under 5 microns. Compatible with 3″ (80 mm) and 4″ (100 mm) rotary tables. Includes fixing T nuts for secure attachment. Epoxy black finish provides rust resistance and durability. Base plate fits both 3-slot and 4-slot rotary tables seamlessly. Features a 13.9 mm diameter locating spigot for precise centering.
3/80 mm Tilting Rotary Table+ ER16 Collet Adaptor with M6 Clamp Kit-USA
3/80 mm Tilting Rotary Table+ ER16 Collet Adaptor with M6 Clamp Kit-USA. Made out of high grain casting, this precision quality low profile rotary table diameter is 80 mm (3Inches) and is most popular light weight tilting rotary table for small and light duty milling operations. Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Hand wheel is graduated in divisions of 10 min & can be set to zero. Designed to tilt between 0- 90 Degrees & can be locked at any working angle position. Total Height when laid flat is 2-7/16 (62 mm) without collet adaptor. The assembly height measures to be 98 mm (with ER16) adapter mounted on it. Center Height in vertical position: 2-17/32 (61.5 mm approx). Base Dimensions : 100 x 105 mm with 2 x Drills (8 mm diameter) at a PCD of 82 mm approx. Weight of the Rotary Table : 2.700 Kgs. Supplied with 1 Pc each of ER16 collet adaptor Pc, suitable M6 clamp kit which is hardened and ground before the epoxy black finish for a rust free life. Supplied with 1 Pc each of ER16 collet adaptor along with a M6 clamp kit which is hardened and ground before the epoxy black finish for a rust free life. It is mainly used to cut gear teeth accurately and equal spacing of the teeth of the gear. Also used for milling gears, splines, squares, cutting of flutes in reamers, drills and milling cutters, racks, grinders, etc. We also offer various accessories like Chucks, Back plates, Clamp kits, Collet Adaptors and Tailstock to suit these rotary table functioning. Pls check our other listings if you need anything from this category.
3/80 mm Tilting Rotary Table+ ER 20 Collet Adaptor with M6 Clamp Kit-USA
3/80 mm Tilting Rotary Table+ ER 20 Collet Adaptor with M6 Clamp Kit-USA. Made out of high grain casting, this precision quality low profile rotary table diameter is 80 mm (3Inches) and is most popular light weight tilting rotary table for small and light duty milling operations. Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Hand wheel is graduated in divisions of 10 min & can be set to zero. Designed to tilt between 0- 90 Degrees & can be locked at any working angle position. Total Height when laid flat is 2-7/16 (62 mm) without collet adaptor. The assembly height measures to be 101 mm approx (with ER20) collet adapter mounted on it. Center Height in vertical position: 2-17/32 (61.5 mm approx). Base Dimensions : 100 x 105 mm with 2 x Drills (8 mm diameter) at a PCD of 82 mm approx. Weight of the Rotary Table : 2.700 Kgs. Supplied with 1 Pc each of ER20 collet adaptor, suitable M6 clamp kit which is hardened and ground before the epoxy black finish for a rust free life. Supplied with 1 Pc of ER20 collet adaptor along with a M6 clamp kit which is hardened and ground before the epoxy black finish for a rust free life. It is mainly used to cut gear teeth accurately and equal spacing of the teeth of the gear. Also used for milling gears, splines, squares, cutting of flutes in reamers, drills and milling cutters, racks, grinders, etc. We also offer various accessories like Chucks, Back plates, Clamp kits, Collet Adaptors and Tailstock to suit these rotary table functioning. Pls check our other listings if you need anything from this category.
3/80 mm Regular Rotary Milling Table ER Collet Adaptor with M6 Clamp Kit- USA
3/80 mm Regular Rotary Milling Table ER Collet Adaptor with M6 Clamp Kit. A rotary table is a precision tool used in machining operations, primarily for rotating a workpiece around a fixed axis, allowing for the accurate machining of circular features, angular positioning, and dividing work into equal sections. 3 (80 MM) Rotary Table 4 Slots. Table Height: 1 5/8. Center Height in Vertical Position: 1. Operates in the Horizontal or Vertical position. Hand Wheel calibrated to 10 degrees per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. M6 CLAMP KIT. Made of high quality tool steel. These are polished & ground from all sides. Sets includes 2 clamps, 2 blocks, screw of m6 thread with 2 flange nuts & 2 tee-nuts. ER COLLET ADAPTOR. ER Collet adaptor designed for small milling rotary tables. Offers exceptional accuracy of under 5 microns. Compatible with 3″ (80 mm) and 4″ (100 mm) rotary tables. Includes fixing T nuts for secure attachment. Epoxy black finish provides rust resistance and durability. Base plate fits both 3-slot and 4-slot rotary tables seamlessly. Features a 13.9 mm diameter locating spigot for precise centering.
Rotary Table Milling 3/80 mm Regular, ER16 & 20 Collet Adaptor, M6 Clamp Kit
Rotary Table Milling Machine Tools. (3/80 mm Regular, ER16 & 20 Collet Adaptor with M6 Clamp Kit). Made out of high grain casting, this precision quality low profile rotary table diameter is 80 mm (3Inches) and is most popular light weight rotary table for small and light duty milling operations. Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Hand wheel is graduated in divisions of 10 min & can be set to zero. Total Height when laid flat is 1-3/4 (44 mm). Center Height in vertical position: 1-3/4 (45 mm approx). Can be clamped both Horizontally and Vertically. Total height of the assembly with a ER16 collet adaptor is 80 mm, and 82 mm when clamped with a ER20 adaptor. Base Dimensions : 110 x 85 mm with 2 x U slots (7.5 mm wide) each wall for Horizontal and Vertical clamping purpose. Also Supplied with a suitable M6 Clamp kit along with this rotary table. Clamp kit is hardened and precisely ground before being epoxy black finish for a rust free life. It is mainly used to cut gear teeth accurately and equal spacing of the teeth of the gear. Also used for milling gears, splines, squares, cutting of flutes in reamers, drills and milling cutters, racks, grinders, etc. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “assortstools” and is located in this country: IN. This item can be shipped worldwide.
- Brand: ASSORTS
- Operation: Manual
- Setting Position: Horizontal/Vertical
Rotary Table Milling 4/100 mm Regular, ER 20 Collet Adaptor with M6 Clamp Kit
Rotary Table Milling Machine Tools (4/100 mm Regular, ER 20 Collet Adaptor with M6 Clamp Kit). Made of Caste Iron, Precision High Quality 4 /100 mm Regular Rotary Table designed for smaller milling machines. Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Can be clamped vertically and horizontally both ways. Height when laid horizontally 2-5/16 Inches (58 mm) without the Adapter & 108 mm (with ER20) collet adapter mounted on it. Center Height in vertical position: 2-1/8 (53.5 mm approx). Hand wheel is graduated in divisions of 10 min & can be set to zero. Base Dimensions : 135 mm x 105 mm with 2 x U slots (9.5 mm). Body is painted and Rest all working surfaces are precision ground. The Dial and locking screws are plated and Handle has epoxy black finish for a rust free life. Smooth Jerk free easy rotation with negligible play. The top of the table is ground to eliminate any excess run out. Supplied with 1 Pc each of ER20 collet adaptor with fixing t nuts/ bolts along with a suitable M6 Clamp kit, which is hardened and black for rust free life. It is mainly used to cut gear teeth accurately and equal spacing of the teeth of the gear. Also used for milling gears, splines, squares, cutting of flutes in reamers, drills and milling cutters, racks, grinders, etc. Pls Note That We Do Not Deliver To The PO Box Addresses. Please Be Aware That Some Countries May Have Local Import Regulations Which Restrict Certain Products From Being Imported. We Take Complete Onus And Responsibility Of Supplying You A Completely Brand New Product Without Any Manufacturing Or Transit Damage. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “assortstools” and is located in this country: IN. This item can be shipped to North, South, or Latin America, all countries in continental Asia, Australia.
- Brand: ASSORTS
- Operation: Manual
- Setting Position: Horizontal/Vertical
Rotary Table 3/ 80 MM With Er16 & Er20 Collet Adaptor, M6 Clamp Kit, Round Vice
Set of 3 /80 mm Rotary Table along with A Round Vice, ER-16 & ER20 Collet Adapter, Tailstock & Small Chuck with Back Plate & Fixing Tnuts. Total Height of the assembly (Table & ER Collet Adaptor) is approx 80 mm. Worm- Gear Ratio – 36:1, which basically means that the 1 rotation of the handle shall rotate the table by 10 degrees. The base plate of adaptor is M6 drilled in a manner that it can fit both 3 as well 4 slots table. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tools-shop2020″ and is located in this country: IN. This item can be shipped worldwide.
- Operation: Manual
- SIZE: (65mm 3 Jaw Self centering Chuck)
- Setting Position: Horizontal/Vertical
- Brand: Unbranded
ER-25 Collet Adaptor for Rotary Table Tilting Instant Milling-Metalworking USA
ER-25 Collet Adaptor for Rotary Table Tilting Instant Milling-Metalworking USA FULFILLED. ABOUT THE ITEM. Precision Quality ER25 collet adaptor designed to fit our small Rotary tables. Manufactured from high quality magnaflux tool steel with Epoxy black finish for a Rust free life. The concentric run out of these collet adaptors alone is under 5 microns. The base plate is M6 drilled in a manner that it can fit both 3 as well 4 slots table. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “globaltools2016″ and is located in this country: US. This item can be shipped to United States.
- SIZE: (WITH A 3\
- Brand: Unbranded
- Setting Position: Horizontal/Vertical
- Operation: Manual
- 1
- 2