back
Hv Milling 4/ 100 Rotary Table & Small Chuck & Back Plate
Quality Tool Set Of 4 Regular Rotary Table With A Chuck With Back Plate & Fixingst Nut Bolts. Chuck’s Body Is High Grain SG Caste Iron & Jaws Are Of Tool Steel. Jaws Are Hardened & Ground. A Tool Steel Back Plate Is Supplied With Fixing T Nuts To Mount The Chuck On It. Back Plate Is Drill In A Manner That Will Fit Both 3 As Well As 4 Slots Table. The Back Side Of The Plate Has A Locating Spigot To Center The Mounting On To The Table. It Can Be Mounted Both In Horizontal & Vertical Positions. The hand Wheel Is Graduated In Divisions Of 10 Min & Can Be Set To Zero. Brand New Very High Quality 4 /100 mm Regular Rotary Table designed for smaller milling machines. Table is graduated 360 Degrees. Worm Gear Ratio -1:36 means that the 1-handle rotation shall turn the table by 10 Degrees. Center Height in vertical position: 2-1/16 (50 mm approx) Hand wheel is graduated in divisions of 10 min & can be set to zero. Can be mounted both in Horizontal & vertical positions. 50 MM 4 JAW INDEPENDENT CHUCK. Brand New, High Precision- Superb Quality! 50 mm 4 Jaws Independent Chuck M12 x 1 mounting Thread. Back Plate also has M12 x 1 thread Spigot to mount the Chuck on it. Back Plate is drilled in a manner that it can be fitted both for 3 as well as 4 Slot Rotary Table. Suitable T -nuts are also supplied. 65 MM 3 JAW SELF-CENTERING CHUCK. 65 mm 3 Jaws Self Centering Chuck M14 x 1 mounting Thread. Back Plate also has M14 x 1 thread Spigot to mount the Chuck on it. Back Plate is drilled in a manner that it can be fitted ONLY to 4 Slot Rotary Table. 70 MM 4 JAW INDEPENDENT CHUCK. 70 mm 4 Jaws Self Centering Chuck with Back Plate & Fixing- Suitable to Mount on 3″ (75 mm) & 4″ (100 mm) Rotary Table -4 Slots Tables. Designed to fit our 3 or 4 Rotary table 4 slots. The chuck mounting is standard Uni-mat Thread M14 x 1.
Rotary Table Horizontal & Vertical 3 75mm With 50mm Lathe Chuck With Back Plate
Rotary Table HV 3 / 75 mm with 50 mm Lathe Chuck. ROTARY TABLE 3/75mm. Table Height With Chuck : 95mm. Worm Gear has 36:1 ratio. The hand wheel is in 10 min division and can be set at 0. Can be used both Vertically & Horizontally. LATHE CHUCK SELF CENTERING 50 MM – 3 JAW. Comes with Suitable T Nuts & Bolts. This Whole Unit can be Assembled & Disassembled Easily to use Either Rotary Table or Chuck Separately.
Hv Milling 4/ 100 Rotary Table & Small Chuck & Back Plate- (usa Fulfilled)
Quality Tool Set Of 4 Regular Rotary Table With A Chuck With Back Plate & Fixingst Nut Bolts. Chuck’s Body Is High Grain SG Caste Iron & Jaws Are Of Tool Steel. Jaws Are Hardened & Ground. A Tool Steel Back Plate Is Supplied With Fixing T Nuts To Mount The Chuck On It. Back Plate Is Drill In A Manner That Will Fit Both 3 As Well As 4 Slots Table. The Back Side Of The Plate Has A Locating Spigot To Center The Mounting On To The Table. It Can Be Mounted Both In Horizontal & Vertical Positions. The hand Wheel Is Graduated In Divisions Of 10 Min & Can Be Set To Zero. Brand New Very High Quality 4 /100 mm Regular Rotary Table designed for smaller milling machines. Table is graduated 360 Degrees. Worm Gear Ratio -1:36 means that the 1-handle rotation shall turn the table by 10 Degrees. Center Height in vertical position: 2-1/16 (50 mm approx) Hand wheel is graduated in divisions of 10 min & can be set to zero. Can be mounted both in Horizontal & vertical positions. 50 MM 4 JAW INDEPENDENT CHUCK. Brand New, High Precision- Superb Quality! 50 mm 4 Jaws Independent Chuck M12 x 1 mounting Thread. Back Plate also has M12 x 1 thread Spigot to mount the Chuck on it. Back Plate is drilled in a manner that it can be fitted both for 3 as well as 4 Slot Rotary Table. Suitable T -nuts are also supplied. 65 MM 3 JAW SELF-CENTERING CHUCK. 65 mm 3 Jaws Self Centering Chuck M14 x 1 mounting Thread. Back Plate also has M14 x 1 thread Spigot to mount the Chuck on it. Back Plate is drilled in a manner that it can be fitted ONLY to 4 Slot Rotary Table. 70 MM 4 JAW INDEPENDENT CHUCK. 70 mm 4 Jaws Self Centering Chuck with Back Plate & Fixing- Suitable to Mount on 3″ (75 mm) & 4″ (100 mm) Rotary Table -4 Slots Tables. Designed to fit our 3 or 4 Rotary table 4 slots. The chuck mounting is standard Uni-mat Thread M14 x 1.
Rotary Table 4 Inch & 4-jaw Selfcentering 50mm Chuck, Back Plate & Fixing Bolts
(H/V) ROTARY TABLE 4 INCH WITH 4-JAW SELF CENTERING LATHE 50MM CHUCK & BACK PLATE + FIXING T-NUTS BOLTS. A great combo of Rotary table 4in 100mm with 4 jaws self centering chuck 50mm with back plates & T-nuts. Quality Low Profile Rotary Table. Chuck Body is High Grain SG Caste Iron & Jaws are of Tool Steel. Jaws are Hardened & Ground.
4 In Rotary Table & 3-jaw Selfcentering 65mm Chuck, Back Plate, Fixing Bolts
(H/V) 4 INCH (100MM) ROTARY TABLE WITH 3-JAW SELF CENTERING 65MM LATHE CHUCK & BACK PLATE + FIXING T-NUTS BOLTS. A great combo of Rotary table wit self centering chuck with back plates & T-nuts. Quality Low Profile Rotary Table. Chuck Body is High Grain SG Caste Iron & Jaws are of Tool Steel. Jaws are Hardened & Ground.
(h/v) Rotary Table & Back Plate + Fixing T-nuts Bolts 3 In 75mm & 4 In 100mm
(H/V) ROTARY TABLE & BACK PLATE + FIXING T-NUTS BOLTS 3″ IN 75MM & 4″ IN 100MM. Low Profile Precision Mini Rotary Table 3″Inch (75mm) & 4″ Inch (100mm) is manufactured from Seasoned casting. Worm- Gear Ratio – 36:1, which basically means that the 1 rotation of the handle shall rotate the table by 10 degrees. Can be used both in horizontal & vertical position. Back Plate also has M14 x 1 thread Spigot to mount the Chuck on it.
(h/v) Rotary Table & Back Plate + Fixing T-nuts Bolts 3 Inch (75mm)
(H/V) ROTARY TABLE & BACK PLATE + FIXING T-NUTS BOLTS 3 INCH 75MM. Low Profile Precision Mini Rotary Table 3Inch (75mm) is manufactured from Seasoned casting. Worm- Gear Ratio – 36:1, which basically means that the 1 rotation of the handle shall rotate the table by 10 degrees. Can be used both in horizontal & vertical position. Back Plate also has M14 x 1 thread Spigot to mount the Chuck on it.
(h/v) Rotary Table & Back Plate + Fixing T-nuts Bolt S 4 Inch (100mm)
(H/V) ROTARY TABLE & BACK PLATE + FIXING T-NUTS BOLTS 4 INCH (100MM). Low Profile Precision Mini Rotary Table 4Inch (100mm) is manufactured from Seasoned casting. Worm- Gear Ratio – 36:1, which basically means that the 1 rotation of the handle shall rotate the table by 10 degrees. Can be used both in horizontal & vertical position. Back Plate also has M14 x 1 thread Spigot to mount the Chuck on it.
380 mm Low Milling Rotary Table (50mm 3Jaws Chuck, Back Plate & Fixing T nuts)
3Inch II 80 mm Low Profile Milling Rotary Table (50 mm 3 Jaws Chuck with Back Plate & Fixing T nuts). Quality Milling Indexing Combo Kit includes include 1 Pc x Low profile 3 II 80 mm Rotary Table supplied with a 50 mm 3 Jaws self centering & suitable Back Plate & T-nuts Bolts for your small light milling jobs. Rotary Table’s Horizontal Center Height When Laid Flat : 44 Mm (without Chuck Assembly) & 98 Mm (with Chuck Assembly On It). Center Height In Vertical Position Is 45 Mm Approx. Can Be Mounted Both In Horizontal & Vertical Position. Rotary Table’s Worm : Gear Ratio Is 1: 10, that Means One Handle Rotation Turns The 360 Degrees Graduation Table By 10 Degrees. Hand Wheel Is Graduated In Divisions Of 10 Min & Can Be Set To Zero. Base Dimensions: 110 X 85 Mm Ii 2 X U Slots For Clamping: 8 Mm. It is mainly used to cut gear teeth accurately and equal spacing of the teeth of the gear. Also used for milling gears, splines, squares, cutting of flutes in reamers, drills and milling cutters, racks, grinders, etc. Chuck & Rotary Table Body is made out of Caste Iron Body. Rest Parts & Clamp kit is Tool Steel. 1 Pc each x 3Inch II 80 mm Rotary Table, Back Plate & Chuck. Pls Note That We Do Not Deliver To The PO Box Addresses. Please Be Aware That Some Countries May Have Local Import Regulations Which Restrict Certain Products From Being Imported. We Take Complete Onus And Responsibility Of Supplying You A Completely Brand New Product Without Any Manufacturing Or Transit Damage.
4/ 100 MM Tilting Rotary Table & Small Chuck, Back Plate, T Nuts USA Fulfilled
PRECISION QUALITY 4/ 100 MM TILTING MILLING INDEXING ROTARY TABLE WITH SMALL CHUCK, BACK PLATE & FIXING T NUTS BOLTS–METALWORKING ENGINEERING MACHINE TOOLS (WITH 65 MM 3 JAW SELF CENTERING). PRECISION QUALITY 4 /100 MM TILTING ROTARY MILLING INDEXING ROTARY TABLE. FEATURES TO TILT AND LOCKED AT ANY ANGLE FROM 0 TO 90 DEGREES. WORM GEAR RATION IS 1:36 WHICH MEANS THAT 1 HANDLE ROTATION SHALL TURN THE TABLE BY 10 DEGREES. SUPPLIED WITH A 65 MM 3 JAWS SELF CENTERING SMALL CHUCK WITH BACK PLATE & FIXING T NUTS BOLTS. TO USA AND WORLDWIDE. Please be aware that some countries may have local import regulations which restrict certain products from being imported. Listing and template services provided by inkFrog.