independent
Hv4 Rotary Table(4slot) With 100mm Independent Chuck + M8 Clamping Kit
ROTARY TABLE 4 (HV4). High Precision and Smooth Rotation of Hand wheel. Table Diameter Is 110 mm, Table Height 80 mm, Centre Height 80 mm. Centre Has a MT-2 Taper, Worm Gear Is 90-1. Vernier Scale Calibrated To 10 Seconds. Quick Release System for Manual Indexing. And Has 4 Tee Slots. Available in Wrinkle Paint. 100 mm Independent Chuck & Backplate. A high Quality 4 Jaw Independent chuck, the body of chuck is made from SG Iron & Jaws are of Tool steel hardened & ground. Same Jaws are reversible as well. Supplied with a mounting back plate & fixing tee nuts with screws. The Back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. The chuck mounting is Thread M14 x 1. These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. The item “HV4 ROTARY TABLE(4SLOT) WITH 100MM INDEPENDENT CHUCK + M8 CLAMPING KIT” is in sale since Monday, February 24, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “zealtools” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- MPN: Does Not Apply
- Brand: Unbranded
Hv4 Rotary Table(3slot) With 100mm Independent Chuck + M8 Clamping Kit
ROTARY TABLE 4 (HV4). High Precision and Smooth Rotation of Hand wheel. Table Diameter Is 110 mm, Table Height 80 mm, Centre Height 80 mm. Centre Has a MT-2 Taper, Worm Gear Is 90-1. Vernier Scale Calibrated To 10 Seconds. Quick Release System for Manual Indexing. And Has 4 Tee Slots. Available in Wrinkle Paint. 100 mm Independent Chuck & Backplate. A high Quality 4 Jaw Independent chuck, the body of chuck is made from SG Iron & Jaws are of Tool steel hardened & ground. Same Jaws are reversible as well. Supplied with a mounting back plate & fixing tee nuts with screws. The Back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. The chuck mounting is Thread M14 x 1. These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Contains 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. The item “HV4 ROTARY TABLE(3SLOT) WITH 100MM INDEPENDENT CHUCK + M8 CLAMPING KIT” is in sale since Monday, February 24, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “zealtools” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Country/Region of Manufacture: India
- MPN: Does Not Apply
- Brand: Unbranded
8 HORIZONTAL & VERTICAL ROTARY TABLE w. 8-4 jaw independent chuck 4 T-nuts
8 PRECISION ROTARY TABLE HORIZONTAL/VERTICAL w. 8 4 jaw independent chuck. The 4 mounting T-nuts are included. DUAL POSITIVE ACTION LOCKS. 10 SECONDS VERNIER READING. GEAR DRIVE IMMERSED IN OIL. The item “8 HORIZONTAL & VERTICAL ROTARY TABLE w. 8-4 jaw independent chuck 4 T-nuts” is in sale since Tuesday, April 14, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “niuniucme” and is located in Madison Heights, Michigan. This item can be shipped to United States.
- MPN: Does Not Apply
- Brand: CME
Rotary Table 80 mm 3 in With 4 Jaws Independent Chuck 65 mm Small With Backplate
Rotary Table 3 with 65 mm Independent Chuck. Precision Rotary Table 3/ 75 mm is manufactured from Seasoned casting. Precisely maintained Chuck Run Out and Bottom Surface for accurate work. 4 T Slots for fixing work can be used with Clamping kit. Table graduated 0-360 degrees in 5 degree divisions. Winding handle is graduated 0-10 degrees in 5 minute divisions. Chuck Diameter: 65 mm. Quality 4 Jaw Independent chuck, body of chuck is made up of SG Iron & Jaws are of Tool steel hardened & ground. Jaws are reversible as well. Supplied with mounting, back plate and fixing tee nuts with screws. The Back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. The chuck mounting is Thread M14 x 1. The item “Rotary Table 80 mm 3 in With 4 Jaws Independent Chuck 65 mm Small With Backplate” is in sale since Saturday, July 13, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “onlineexpertools” and is located in Delhi, DELHI. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- Tilting: No
- No. of Slots: 4
- Chuck Diameter: 65 mm
- Thread Size: M14 x 1
- Rotary Table Size: 3 in
- Operation: Manual
- MPN: Does Not Apply
- Cross-Slide: No
- Brand: Unbranded
Rotary Table 3 75 mm Horizontal Vertical 4 Jaw Independent Chuck 70 mm
3 /75mm Rotary Table. 4 Jaw Chuck Independent 70 MM. Weight :- 3 Kgs / 6.6 Lbs. Rotary Table: Precision ground horizontally and vertically. Graded cast iron and precision ground. Gear Ratio 36:1. The work table is graduated to full 360 degrees. The 4 jaw chuck has a big range clamping. The chuck has 4 reversible jaws. There is a fixture plate on which the chuck is mounted. Is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed usually horizontal or vertical. A rotary table can be used. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. Create large-diameter holes, via milling in a circular toolpath, on small milling machines. To cut straight lines &. The colour of item can be vary depend upon availability. The item “Rotary Table 3 75 mm Horizontal Vertical 4 Jaw Independent Chuck 70 mm” is in sale since Saturday, February 9, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tool-supplier” and is located in DELHI, DELHI. This item can be shipped worldwide.
- Weight: 3 Kgs / 6.6 Lbs
- Table Dia: 3″/75mm
- Chuck Jaw: 4 Jaw
- Chuck Dia: 70 MM
- Modified Item: No
- Country/Region of Manufacture: India
- Setting Position: Horizontal/Vertical
- California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Gear Ratio: 36:1
- MPN: Does Not Apply
- Brand: Unbranded
New Rotary Table 3 / 75 mm, 4 jaw Independent Chuck with Back Plate
Integrates of Rotary Kit. Rotary Table 3/75 mm. 4 Jaw Independent with Back Plate 70 mm. Weight of Kit :- 3 Kgs/ 6.6 Lbs. Rotary Table: Precision ground horizontally and vertically. Graded cast iron and precision ground. Gear Ratio 36:1. The work table is graduated to full 360 degrees. The 4 jaw chuck has a big range clamping. The chuck has 4 reversible jaws. There is a fixture plate on which the chuck is mounted. Rotary Table Uses. Is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed (usually horizontal or vertical). A rotary table can be used. To drill equidistant holes on a circular flange. To cut a round piece with a protruding tang. Create large-diameter holes, via milling in a circular tool path, on small milling machines. To cut straight lines &. Term & Conditions. The colour of item can be vary depend upon availability. The item “New Rotary Table 3 / 75 mm, 4 jaw Independent Chuck with Back Plate” is in sale since Friday, March 22, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tool-supplier” and is located in DELHI, DELHI. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
- Weight: 3 Kgs/ 6.6 Lbs
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- Setting Position: Horizontal/Vertical
- California Prop 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- MPN: Does Not Apply
- Brand: Unbranded
- Rotary Table: 3”/75mm
- Chuck Size: 70mm
- Gear Ratio: 36:1
4100mm Rotary Table Horizontal Vertical+m6 Clamp Kit+70 MM 4 Jaw Independent
4 (100 mm) Rotary Table Designed for smaller milling machines. Table diameter 100 mm Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Center Height in vertical position: 2-1/16 (50 mm approx) excluding chuck. Hand wheel is graduated in divisions of 10 min & can be set to zero. Can be mounted both in Horizontal & vertical position. Description of Chuck made from High Quality chuck, the body of which is made from SG Iron & Jaws are of Tool steel hardened & ground. Supplied with a mounting back plate & fixing tee nuts with screws. The Back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. A Tool Steel Back Plate is supplied with Fixing T nuts to Mount the Chuck on It. Back Plate is Drill in a manner that it will fit both 3 as well as 4 slots Table. The Back side of the Plate has a locating Spigot to center the Mounting on to the Table. A suitable M6 clamp kit is included along. The item “4100MM ROTARY TABLE HORIZONTAL VERTICAL+M6 CLAMP KIT+70 MM 4 JAW INDEPENDENT” is in sale since Thursday, August 9, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “globaltools2016″ and is located in Delhi, Delhi. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- MPN: Does Not Apply
- Brand: globaltools2016
- Non-Domestic Product: No
Horizontal Vertical Milling Indexing 4/100 Rotary Table+50 MM 4 Jaw Independent
Description of 4 (100 mm) Rotary Table Designed for smaller milling machines. Table diameter 100 mm Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Center Height in vertical position: 2-1/16 (50 mm approx) excluding chuck. Hand wheel is graduated in divisions of 10 min & can be set to zero. Can be mounted both in Horizontal & vertical position. Description of the 50 mm 4 jaws Independent Chuck made from High Quality chuck, the body of which is made from SG Iron & Jaws are of Tool steel hardened & ground. Supplied with a mounting back plate & fixing tee nuts with screws. The Back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. A Tool Steel Back Plate is supplied with Fixing T nuts to Mount the Chuck on It. Back Plate is Drill in a manner that it will fit both 3 as well as 4 slots Table. The Back side of the Plate has a locating Spigot to center the Mounting on to the Table. The item “HORIZONTAL VERTICAL MILLING INDEXING 4/100 ROTARY TABLE+50 MM 4 JAW INDEPENDENT” is in sale since Thursday, August 9, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “globaltools2016″ and is located in Delhi, Delhi. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: India
- Custom Bundle: No
- MPN: Does Not Apply
- Brand: globaltools2016
- Non-Domestic Product: No