3/ 80 mm Regular Rotary Table With Small Chucks and back Plate


3/ 80 mm Regular Rotary Table With Small Chucks and back Plate. A rotary table is used to rotate a workpiece precisely during machining, allowing for accurate creation of circular features, angles, and indexing tasks. A chuck is used to securely hold and grip a workpiece on a machine tool, ensuring it remains stable and aligned during operations like turning, drilling, or milling. 3/ 80 mm Rotary Table. Small low profile Rotary Table for Milling operation with Table Diameter – 3 Inches (80 mm) Vertical Height – 1-5/8 Inch. Gear Ratio – 36:1, which basically means that the 1 rotation of the handle shall rotate the table by 10 degrees. 1/4″ 4 T-Slots: 5/16″. Table scale is calibrated in 5 degree increement. Can be used both in horizontal & vertical position. Chuck 50mm 3 Jaw Self Centering. Mm 3-Jaw Self-Centering Lathe Chuck. Compatible with M12 x 1 mm threading. Chuck 50 mm 4 Jaw Self Centering. Precision 50 mm 4-Jaw Self-Centering Lathe Chuck. Chuck 50 mm 4 Jaw Independent. Precision 50 mm 4-Jaw Independent Lathe Chuck. Chuck 65 mm 3 Jaw Self Centering. Precision 65mm 3-Jaw Self-Centering Lathe Chuck. Compatible with M14 x 1 mm threading. Chuck 65 mm 4 Jaw Self Centering. Precision 65mm 4-Jaw Self-Centering Lathe Chuck. Chuck 70 mm 4 Jaw Independent. Precision 70 mm 4-Jaw Independent Lathe Chuck. Chuck 80 mm 3 Jaw Self Centering. Recess is 55 mm Total Height excluding the jaws (Only Body) : 45 mm. The Back plate is drilled with M6 size tapped holes for the chuck’s bolts to be screwed with the back plate and then provided with 2 counter drills to them clamp it with the Rotary table’s T slots. 80 mm 3 jaw self centering chuck with spare set of reversible jaws and a chuck key, Also included a suitable steel back plate with fixing t nuts and bolts to enable this to mount it on this. The Chuck body is made of high grain casting and the jaws are made of hardened tool steel for a long life. The chuck recess is 55 mm same as that of the back plate. The back plate has a 13.9 mm small spigot that helps it in centrally locate it in the center of the Rotary Table. Chuck 80 mm 4 Jaw Independent. 80 mm 4 Jaw Independent Chuck with a Backplate & 3 Sets of T-Nuts. The other side of the Back plate has a small spigot to fit /adjust into the center of the Rotary table for better accuracy and Fitting. Supplied with Fixing T nuts Bolts. Body is made of Graded Casting. Jaws are of Alloy Tool Steel -Hardened and Ground. Supplied with a Tool Steel Back Plate having same recess as that of the chuck. The plate is threaded drilled in a manner that the chuck can be screwed to the Back Plate. The Back plate has been counter drilled to fit to our 3″/ 80mm & 4″/ 100 mm Rotary tables.

New ADJ 4 inch 100mm Tilting Tailstock & Rotary Table Tilting Dividing Head USA







Description For 4 inches 100mm Tilting 0°- 90° Rotary Table Milling Machine Tool. 4 100mm Tilting Rotary Table. Features to Tilt between 0 – 90 degrees and can be locked at any position. Table diameter 100mm table is graduated 360 degrees. Worm gear ratio 1:36 which means that 1 handle rotation shall turn the table by 10 degrees. Centre height in vertical position: 2-5/8 (66mm approx) hand wheel is graduated in division of 10 minuend can be set at Zero. Can be mounted in Horizontal & Vertical position. Tip hardness [HRC] 40 – 45. Material tip C45E steel. Net weight [kg] 2.4. Center height [mm] 45 – 80. Tip Ø [mm] 15. Dimensions base [mm] 140 X 57. Total height [mm] 155. Thanks to the height-adjustable tip, this tailstock is suitable for dividing heads whose center of the rotary table is between 45 and 80 mm in a vertical position. In order to achieve a horizontal alignment of the workpiece, it is clamped between the dividing head and the tailstock. The tailstock center is fixed at the set height using a clamping screw, and the horizontal position of the center can also be secured by clamping. The lateral adjustment of the centering tip is made possible by a knurled rotary knob. The horizontal travel of the tip is 27 mm. PROUDLY MADE IN INDIA. Skylark Tools comprises of a dedicated and skilled team of engineers with an aim of providing you tools of highest Indian industrial standards. Situated at the industrial hub of India we specialize in providing complete tooling solutions. Our Motto: Right Quality. The Motto of the Company is to deliver the best products and services to the customers at most competitive prices. We ensure the product reaches you at the earliest. We are looking forward to your positive reviews and to build a long term relationship.

6HV Rotary Table 4 slots with Indexing Plates Set and Adjustable Tailstock








Upgrade your machining capabilities with this high-precision 6 Rotary Table featuring an Indexing Plates Set for accurate dividing, indexing, and circular machining. Designed for both horizontal and vertical mounting, this rotary table is perfect for milling, drilling, slotting, and gear cutting applications. The included indexing plates allow for precise angular division, making it an essential tool for machinists, metalworkers, and DIY enthusiasts. 6 Precision Rotary Table. Built from high-grade cast iron with precision-ground components for smooth operation. Indexing Plates Set Included – Achieve accurate angular divisions for gear cutting, bolt hole patterns, and complex machining tasks. Horizontal & Vertical Mounting – Can be positioned flat or upright for versatile applications. 360° Graduated Scale with Vernier Calibration – Enables ultra-fine adjustments for high precision. 90:1 Gear Ratio – One full turn of the handwheel moves the table by 4°, allowing for precise machining control. 4-Slot T-Table Design – Compatible with various clamping and fixture setups for secure work-holding. Smooth Hand-wheel Operation – Equipped with adjustable backlash to maintain accuracy over time. 90:1 (1 full handwheel rotation = 4° movement). Standard 10mm slots for secure clamping. Yes, full set for precision dividing. Center Height (Vertical Position). High-grade cast iron with hardened and precision-ground components. Plate A : 15, 16, 17,18, 19, 20. Plate B : 21, 23, 27, 29, 31, 33. Plate C : 37, 39, 41, 43, 47, 49. Center Height Range : Adjustable to match HV4 & HV6 rotary table (80mm to 110mm) height. Material : Cast Iron Body with Ground Steel Components. Base : Slotted for secure mounting on the machine table. Milling, drilling, and grinding. Indexing & dividing for gear cutting, hole patterns, and precision machining. Engraving, slotting, and circular cutting. Metal & woodworking projects. Custom machining setups requiring precise rotation and angular positioning. Supports long shafts and work-pieces during rotation. Perfect for use with dividing heads and rotary tables in horizontal setups. Improves accuracy and reduces deflection during machining. 1 x 6 Rotary Table. 1 x Indexing Plates Set. (3 plates for different divisions). 1 x Adjustable Tailstock. Why Choose This Rotary Table? Perfect for professionals and hobbyists alike. Versatile Mounting – Use in both horizontal and vertical positions. Enhanced Indexing Functionality – Divide work-pieces with accuracy using the indexing plates. Durable & Reliable – Built for long-lasting performance with heavy-duty materials. Great Value – High-quality milling accessory at a competitive price. We are looking forward to your positive reviews & to build a healthy relationship.

Horizontal Vertical 4 Inch II 100 mm Rotary Milling Indexing Table with M6


A rotary table is a precision tool used predominantly in metalworking, particularly in machining operations like milling and drilling. Its primary function lies in enabling machining at precise angular intervals around a fixed point, commonly referred to as indexing. This capability facilitates the creation of intricate geometries, circular features, and multi-sided machining without the need for manual repositioning of the workpiece. A clamp kit for a rotary table is used to secure workpieces onto the rotary table during machining operations. Rotary tables are often used in machining setups to enable circular cutting, hole drilling, and other operations around a fixed axis of rotation. 360-Degree Graduation: The table is graduated a full 360 degrees, allowing for precise control and positioning of the workpiece. The clear markings ensure easy and accurate angle setting for all your milling tasks. Worm Gear Ratio: 1:36 The gear ratio means that one full rotation of the handle turns the table by 10 degrees, providing fine control over the movement and ensuring precision in every operation. Vertical Position Center Height: 2-1/16 (50 mm approx) The center height in the vertical position is 2-1/16 inches, which aligns perfectly with the smaller milling machine setups, offering versatility in workpiece positioning. Handwheel Graduations: The handwheel is graduated in divisions of 10 minutes, allowing for highly detailed adjustments. The scale can also be set to zero, making it easy to track and repeat your adjustments for consistent results. Mounting Flexibility: The Regular model can be mounted in both horizontal and vertical positions, enhancing its versatility for a wide range of applications. Whether you need flat or angled cuts, this rotary table can handle it with ease. This M6 clamp kit is designed for use with 3″ or 4″ rotary tables. Includes a set of clamps, bolts, nuts, and T-slot nuts. Compatible with rotary tables featuring M6 T-slots or mounting holes. Allows for secure fastening of workpieces onto the rotary table during machining operations. Made of tool steel for durability and reliability. Provides essential holding power to maintain precision and accuracy. Ideal for use in machining setups requiring precise rotary table positioning.

Tsudakoma RNCM-301R 12 Rotary Table / 4th Axis







The Tsudakoma RNCM-301R 12 Rotary Table / 4th Axis is a high-quality CNC-controlled workholding unit manufactured by Tsudakoma in Japan. This rotary table allows for horizontal and vertical setting positions, making it versatile for various manufacturing needs. With a 12 diameter and a sturdy construction, this unit is designed to provide precise and reliable performance for metalworking and manufacturing applications.

Horizontal Vertical Red Beam Rotary Laser Level with Receiver and Remote













Horizontal Vertical Red Beam Rotary Laser Level with Receiver and Remote. Comes with receiver, remote, glasses, and carry case.

High-precision HV3/4/5/6/8/10/12/14/16-inch Vertical and Horizontal Indexing


High-precision HV3/4/5/6/8/10/12/14/16-inch vertical and horizontal indexing dial milling machine rotary table. Specifications HV-4 inch HV-6 inch HV-8 inch HV-10 inch HV-12 inch HV-14 inch HV-16 inch. Diameter 110mm 150mm 200mm 250mm 300mm 350mm 400mm. Taper hole Table center MT2 MT2 MT3 MT3 MT4 MT4 MT4 MT4. Table vertical 81.5mm 100mm 135mm 165mm 195mm 230mm 260mm. Table T-slot width 14. Positioning pin width 12 16 18. Number of slots in table top Three slots Four slots Six slots. Turbine ratio 1:75 1:90. Maximum load capacity Horizontal 70KG 100KG 150KG 200KG 250KG 300KG 350KG. Maximum Load Vertical 30kg 50kg 75kg 100kg 125kg 150kg 175kg. Indexing error 0.1° 0.05° 0.02. Weight 9kg 14kg 28kg 50kg 75kg 88kg 105kg. Item Diameter 110mm 150mm 200mm 250mm 300mm 350mm 400mm Taper hole Table center MT2 MT2 MT3 MT3 MT4 MT4 MT4 MT4 Table vertical 81.5mm 100mm 135mm 165mm 195mm 230mm 260mm Center Height Table T-slot width 14 Positioning pin width 12 16 18 Number of slots in table top Three slots Four slots Six slots Turbine ratio 1:75 1:90 Maximum load capacity Horizontal 70KG 100KG 150KG 200KG 250KG 300KG 350KG Maximum Load Vertical 30kg 50kg 75kg 100kg 125kg 150kg 175kg Indexing error 0.1° 0.05° 0.02 Weight 9kg 14kg 28kg 50kg 75kg 88kg 105kg.

High Precision CNC Rotary Table with Stepper Motor







High Precision CNC Rotary Table with Stepper Motor.

Buyohlic Horizontal Vertical HV8 8 (200 mm) -3 slots Rotary Milling Indexing









A rotary table is a precision tool used predominantly in metalworking, particularly in machining operations like milling and drilling. Its primary function lies in enabling machining at precise angular intervals around a fixed point, commonly referred to as indexing. This capability facilitates the creation of intricate geometries, circular features, and multi-sided machining without the need for manual repositioning of the workpiece. By mounting the workpiece on the rotary table and rotating it, machinists can execute complex operations such as gear cutting, spiral grooving, and helical cuts with high precision. Additionally, rotary tables are essential for tasks requiring circular or arc-shaped machining, offering versatility and efficiency in manufacturing processes. Upgrade your machining capabilities with our HV8 Rotary Table, designed for high precision and durability. Ideal for both professional and hobbyist applications, this rotary table is built to handle diverse machining tasks with ease and accuracy. Disc Diameter : 200 mm – Optimized for a wide range of setups and part sizes. Turbine Worm Speed Ratio : 1:90 – Ensures smooth, controlled rotation, perfect for precision work. Vertical Center Height : 135 mm – Accommodates varied machining needs, making it a versatile addition to your setup. Weight : 30 kg – Stable and robust, it minimizes vibrations, enhancing accuracy. Constructed with premium materials, this HV8 rotary table withstands heavy-duty use while maintaining consistent, reliable performance. Its 3-slot design allows for secure, versatile clamping of workpieces, ensuring ease of use across various machining applications. The 1:90 gear ratio provides precise control over positioning, making it well-suited for detailed work that requires accuracy. The compact yet sturdy design fits seamlessly into your workspace, allowing for flexibility whether working on vertical or horizontal setups. Perfect for milling, drilling, and even more complex operations like engraving or machining circular parts.

Lot of 5 Precision Machining Rotary Tables & Chucks & 4 Face Plates 320mm ts320A

























Lot of 5 Precision Machining Rotary Tables & Chucks & 3 Face Plates, Everything came from a local machine shop and im not a machinist so this stuff is foreign to me, see images for more info. Most have no brand names that I can find but a more detailed description of each is below. Rotary table (green base) with chuck, is stamped made in japan (3 jaw 8/210mm chuck). Largest one is a 320mm. Rotary table with face plate, name plate is in. Has a micrometer turning handle that spins the table. 4 Jaw 10 chuck (No markings) has screws coming out bottom. Amestra 11 3/4 3 jaw chuck, plain back. 4 Round face plates, No markings on any them (2) 16″ (2) 15″, 1 has a lot rust, 1 have some, others look ok.
