drilling
10” Horizontal & Vertical Rotary Table Vernier Reading Milling Drilling Boring













10” Horizontal & Vertical Rotary Table Vernier Reading Milling Drilling Boring. 10” Horizontal & Vertical Rotary Table. Table Diameter: 9.84″; Horizontal O/A Height: 4.53″; Center Height Vertical Position: 6.49; The diameter of the center hole is 15mm and taper is MT3. Overall Height in Vertical Position: 12.79”; Overall Width (Not Including Handle) In Vertical Position: 11.02”; Mounting Table Bolt Width :0.63”; T-slot Width: 0.55′. Extra Deep Coolant Channel; Dual Positive Action Locks; Satin Chrome Dials; Maximum Individual Spacing Error 4″ Table 120″, 6″ Table 80″, 8, 10, 12, 16″ Tables 60″; 4″ Table Utilizes Low Profile Locks For Added Work Space; Gear Ratio: 4″ table is72:1; 6-16 tables are 90:1; Parallelism Of Clamping Surface To Angle Face. 0008; Squareness of angle Surface To Clamping Surface. 0004; Flatness Of Clamping Service-concave. 0006; Concentricity Of Center Bore. Table Diameter: 9.84. Horizontal O/A Height: 4.53. Center Height Vertical Position: 6.49. Overall Height in Vertical Position: 12.79′. Overall Width (Not Including Handle) In Vertical Position: 11.02′. Mounting Table Bolt Width :0.63′. T-slot Width: 0.55′. The diameter of the center hole is 15mm and taper is MT3. Extra Deep Coolant Channel. Dual Positive Action Locks. Maximum Individual Spacing Error 4″ Table 120″, 6″ Table 80″, 8, 10, 12, 16″ Tables 60″. 4 Table Utilizes Low Profile Locks For Added Work Space. Gear Ratio: 4″ table is72:1; 6-16″ tables are 90:1. Flatness Of Clamping Service-concave. Concentricity Of Center Bore. Parallelism Of Clamping Surface To Angle Face. Squareness of angle Surface To Clamping Surface. Squareness of clamping surface to center slot. We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more. We are always working hard to ensure your package arrives as soon as possible. We do not accept P. Please provide a physical address. We try our very best to make sure every customer is completely satisfied. If there’s a problem, message us! We’re happy to help.

VEVOR Rotary Table 8 Inch Horizontal Vertical HV8 Precision 3MT Milling Drilling













VEVOR Rotary Table 8 Inch Horizontal Vertical HV8 Precision 3MT Milling Drilling Machine Vernier Reading Milling Drilling Boring Vertical & Horizontal Design HT200 Casting Excellent Precision Easy to Adjust Wrench & Screw Various Application Vertical Height : 40 mm/1.57 inch, Horizontal Height : 105 mm/4.13 inch, Material: HT200 Casting, Table Diameter: 8, Reduction ratio: 1:90, Center Bore: MT-3.

4 Horizontal Vertical Precision Rotary Table Milling Drilling


















This was donated to our organization. We believe all parts are there, but cannot be sure. Received in open box. Please see photos for details and condition confirmation. As always, thank you for your interest in and support of our nonprofit. We are listing this item to help benefit our non. Dba My Recovery Day (MRD). MRD enriches the lives of, and directly supports, individuals in recovery. Please see the item condition description and pictures above for details. If you have any questions. Thank you for looking and for your support! If you live outside of the Continental US, additional. If the item is not picked up within 10 days, then all monies paid are forfe. Ited and the item is relisted. Any item is returnable if it was not as described between the pictures taken or the included. If you choose to return the item because. If the above re. Quests are not met the product is not returnable.

VEVOR Rotary Table 8 Inch Horizontal Vertical HV8 Precision 3MT Milling Drilling











VEVOR Rotary Table 8 Inch Horizontal Vertical HV8 Precision 3MT Milling Drilling Machine Vernier Reading Milling Drilling Boring Vertical & Horizontal Design HT200 Casting Excellent Precision Easy to Adjust Wrench & Screw Various Application Vertical Height : 40 mm/1.57 inch, Horizontal Height : 105 mm/4.13 inch, Material: HT200 Casting, Table Diameter: 8, Reduction ratio: 1:90, Center Bore: MT-3.

Vertical & Horizontal Milling Machine Rotary Table 360° for Indexing Drilling


Vertical & Horizontal Rotary Table. The vertical & horizontal rotary table, one of the main accessories of the milling machine, is a precision work positioning device. This machine is widely used in metalworking, enabling the operator to drill or cut work at exact intervals around a fixed axis. Vertical & Horizontal Position. Tough Equipment & Tools, Pay Less. VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Note: 100MM / 4 Milling Rotary Table without Centre Bore. Vertical & Horizontal Design. It can be mounted “flat, ” with the table rotating around a vertical axis, in the same plane as the cutter of a vertical milling machine. Or, mounted the rotary table on its end (or mount it “flat” on a 90° angle plate) so that it rotates about a horizontal axis. In this configuration, a tail stock can also be used, thus holding the workpiece between centers. HT200 casting has excellent casting performance, shock absorption performance as well as high strength heat resistance. It ensures the superior performance of the machine and provides you a good sense of use. The dial is divided into 360 degrees in total. The minimum scale can be accurate to seconds. All of these help you handle more complex and more precise tasks. Spindle end is applied accuracy bearing. Can be assured to keep very steady under load cutting. It’s not difficult for you to adjust the rotary table milling machine. What you should do is to adjust the handle to the position where you want because the precise scale is marked on the dial. Except for the rotary machine table, we also offer you four locating blocks or wrench and screws. The center can be corrected quickly and accurately by the Key guide block. Widely used in metalworking, enabling the operator to drill or cut work at exact intervals around a fixed axis. Great for circular cutting work, boring, spotfacing, and similar work. 150MM / 6 Milling Rotary Table. Clamping table diameter: 150mm / 6. Number of grooves: 4. Width of grooves: 11mm / 0.43. Circular Accuracy: 0.04. The parallelism of the mounting surface: 0.04. Transmission of the worm gear: 90/1. Basic dimension horizontal: 180 x 170mm / 7 x 6.7. Basic dimension vertical: 205 x 80mm / 8 x 3.15. Height: 80mm / 3.15. Weight without packaging: 11.1kg / 24.47lb. Worktable with scale: 360 °. 40kg / 88.18lb. 20kg / 44.09lb. 1 x Vertical and Horizontal Rotary Working Table. 150MM / 6 Milling Rotary Table With Dividing Plates. T-slot Diameter: 1/2inch (14mm). Table Dimension: 6inch (150mm). Plate’A’ – 15, 16, 17, 18, 19, 20. Plate’B’ – 21, 23, 27, 29, 31, 33. Plate’C’ – 37, 39, 41, 43, 47, 49. 1 x Rotary Table. 3 x Dividing Plates. 1 x A Set of Accessory. 100MM / 4 Milling Rotary Table. Table Diameter: 4/100mm. Reduction Ratio: 1:36. Horizontal Height : 2.76/70mm. Net Weight: 33.07/15kg. 1 x Screw Set. 100MM / 4 Milling Rotary Table With Dividing Plates. T-slot Diameter: 1/2inch (12mm). Table Dimension: 4x3inch (100x80mm). 200MM / 8 Milling Rotary Table 3-Slot. Table Diameter: 8/200mm. Horizontal Height : 4.13/105mm. Vertical Height : 1.57/40mm. 200MM / 8 Milling Rotary Table 4-Slot. Horizontal Height : 105 mm/4.13 inch. Vertical Height : 40 mm/1.57 inch. 2 x Positioning Keys. 2 x Mounting Screws. VERTICAL & HORIZONTAL POSITION? – Our rotary table with four slots is 4” / 6” / 8” (100mm / 150mm / 200mm) in diameter, it can be used in horizontal and vertical positions, meeting two functions and also bringing you convenient as well as efficient milling experience. FANTASTIC MATERIAL? – HT200 Casting is mainly used to cast parts subjected to pressure and vibration on mechanical equipment. Adopted it as the material, our rotary milling table is durable, shock-absorbing, and heat-resistant. EXCELLENT PRECISION? – The rotary table for milling machine can be graduated 360 Degrees. Resetting dial and handwheel can be graduated in seconds. The enclosed design prevents the penetration of dirt and chips. CONVENIENT TO ADJUST? – The dial of the rotary table for mill is marked with an accurate scale. Just operate the control handle and adjust it to the desired position, which makes it possible to use it easily and conveniently. WIDE APPLICATION? – This mill rotary table is popular for its excellent performance, practical design, and high precision. They are widely used for circular cutting work, boring, spot facing, and similar work.

Vertical & Horizontal Rotary Table Tilting 360° for Milling Drilling Machine


Vertical & Horizontal Rotary Table. The vertical & horizontal rotary table, one of the main accessories of the milling machine, is a precision work positioning device. This machine is widely used in metalworking, enabling the operator to drill or cut work at exact intervals around a fixed axis. Vertical & Horizontal Position. Tough Equipment & Tools, Pay Less. VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Vertical & Horizontal Design. It can be mounted “flat, ” with the table rotating around a vertical axis, in the same plane as the cutter of a vertical milling machine. Or, mounted the rotary table on its end (or mount it “flat” on a 90° angle plate) so that it rotates about a horizontal axis. In this configuration, a tail stock can also be used, thus holding the workpiece between centers. HT200 casting has excellent casting performance, shock absorption performance as well as high strength heat resistance. It ensures the superior performance of the machine and provides you a good sense of use. The dial is divided into 360 degrees in total. The minimum scale can be accurate to seconds. All of these help you handle more complex and more precise tasks. Spindle end is applied accuracy bearing. Can be assured to keep very steady under load cutting. It’s not difficult for you to adjust the rotary table milling machine. What you should do is to adjust the handle to the position where you want because the precise scale is marked on the dial. Except for the rotary machine table, we also offer you four locating blocks or wrench and screws. The center can be corrected quickly and accurately by the Key guide block. Widely used in metalworking, enabling the operator to drill or cut work at exact intervals around a fixed axis. Great for circular cutting work, boring, spotfacing, and similar work. 150MM / 6 Milling Rotary Table. Clamping table diameter: 150mm / 6. Number of grooves: 4. Width of grooves: 11mm / 0.43. Circular Accuracy: 0.04. The parallelism of the mounting surface: 0.04. Transmission of the worm gear: 90/1. Basic dimension horizontal: 180 x 170mm / 7 x 6.7. Basic dimension vertical: 205 x 80mm / 8 x 3.15. Height: 80mm / 3.15. Weight without packaging: 11.1kg / 24.47lb. Worktable with scale: 360 °. 40kg / 88.18lb. 20kg / 44.09lb. 1 x Vertical and Horizontal Rotary Working Table. 150MM / 6 Milling Rotary Table With Dividing Plates. T-slot Diameter: 1/2inch (14mm). Table Dimension: 6inch (150mm). Plate’A’ – 15, 16, 17, 18, 19, 20. Plate’B’ – 21, 23, 27, 29, 31, 33. Plate’C’ – 37, 39, 41, 43, 47, 49. 1 x Rotary Table. 3 x Dividing Plates. 1 x A Set of Accessory. 100MM / 4 Milling Rotary Table. Table Diameter: 4/100mm. Reduction Ratio: 1:36. Horizontal Height : 2.76/70mm. Net Weight: 33.07/15kg. 1 x Screw Set. 100MM / 4 Milling Rotary Table With Dividing Plates. T-slot Diameter: 1/2inch (12mm). Table Dimension: 4x3inch (100x80mm). 200MM / 8 Milling Rotary Table 3-Slot. Table Diameter: 8/200mm. Horizontal Height : 4.13/105mm. Vertical Height : 1.57/40mm. 200MM / 8 Milling Rotary Table 4-Slot. Horizontal Height : 105 mm/4.13 inch. Vertical Height : 40 mm/1.57 inch. 2 x Positioning Keys. 2 x Mounting Screws. VERTICAL & HORIZONTAL POSITION? – Our rotary table with four slots is 4” / 6” / 8” (100mm / 150mm / 200mm) in diameter, it can be used in horizontal and vertical positions, meeting two functions and also bringing you convenient as well as efficient milling experience. FANTASTIC MATERIAL? – HT200 Casting is mainly used to cast parts subjected to pressure and vibration on mechanical equipment. Adopted it as the material, our rotary milling table is durable, shock-absorbing, and heat-resistant. EXCELLENT PRECISION? – The rotary table for milling machine can be graduated 360 Degrees. Resetting dial and handwheel can be graduated in seconds. The enclosed design prevents the penetration of dirt and chips. CONVENIENT TO ADJUST? – The dial of the rotary table for mill is marked with an accurate scale. Just operate the control handle and adjust it to the desired position, which makes it possible to use it easily and conveniently. WIDE APPLICATION? – This mill rotary table is popular for its excellent performance, practical design, and high precision. They are widely used for circular cutting work, boring, spot facing, and similar work.

Vertical & Horizontal Milling Machine Rotary Table 360° for Indexing Drilling


Vertical & Horizontal Rotary Table. The vertical & horizontal rotary table, one of the main accessories of the milling machine, is a precision work positioning device. This machine is widely used in metalworking, enabling the operator to drill or cut work at exact intervals around a fixed axis. Vertical & Horizontal Position. Tough Equipment & Tools, Pay Less. VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Note: 100MM / 4 Milling Rotary Table without Centre Bore. Vertical & Horizontal Design. It can be mounted “flat, ” with the table rotating around a vertical axis, in the same plane as the cutter of a vertical milling machine. Or, mounted the rotary table on its end (or mount it “flat” on a 90° angle plate) so that it rotates about a horizontal axis. In this configuration, a tail stock can also be used, thus holding the workpiece between centers. HT200 casting has excellent casting performance, shock absorption performance as well as high strength heat resistance. It ensures the superior performance of the machine and provides you a good sense of use. The dial is divided into 360 degrees in total. The minimum scale can be accurate to seconds. All of these help you handle more complex and more precise tasks. Spindle end is applied accuracy bearing. Can be assured to keep very steady under load cutting. It’s not difficult for you to adjust the rotary table milling machine. What you should do is to adjust the handle to the position where you want because the precise scale is marked on the dial. Except for the rotary machine table, we also offer you four locating blocks or wrench and screws. The center can be corrected quickly and accurately by the Key guide block. Widely used in metalworking, enabling the operator to drill or cut work at exact intervals around a fixed axis. Great for circular cutting work, boring, spotfacing, and similar work. 150MM / 6 Milling Rotary Table. Clamping table diameter: 150mm / 6. Number of grooves: 4. Width of grooves: 11mm / 0.43. Circular Accuracy: 0.04. The parallelism of the mounting surface: 0.04. Transmission of the worm gear: 90/1. Basic dimension horizontal: 180 x 170mm / 7 x 6.7. Basic dimension vertical: 205 x 80mm / 8 x 3.15. Height: 80mm / 3.15. Weight without packaging: 11.1kg / 24.47lb. Worktable with scale: 360 °. 40kg / 88.18lb. 20kg / 44.09lb. 1 x Vertical and Horizontal Rotary Working Table. 150MM / 6 Milling Rotary Table With Dividing Plates. T-slot Diameter: 1/2inch (14mm). Table Dimension: 6inch (150mm). Plate’A’ – 15, 16, 17, 18, 19, 20. Plate’B’ – 21, 23, 27, 29, 31, 33. Plate’C’ – 37, 39, 41, 43, 47, 49. 1 x Rotary Table. 3 x Dividing Plates. 1 x A Set of Accessory. 100MM / 4 Milling Rotary Table. Table Diameter: 4/100mm. Reduction Ratio: 1:36. Horizontal Height : 2.76/70mm. Net Weight: 33.07/15kg. 1 x Screw Set. 100MM / 4 Milling Rotary Table With Dividing Plates. T-slot Diameter: 1/2inch (12mm). Table Dimension: 4x3inch (100x80mm). 200MM / 8 Milling Rotary Table 3-Slot. Table Diameter: 8/200mm. Horizontal Height : 4.13/105mm. Vertical Height : 1.57/40mm. 200MM / 8 Milling Rotary Table 4-Slot. Horizontal Height : 105 mm/4.13 inch. Vertical Height : 40 mm/1.57 inch. 2 x Positioning Keys. 2 x Mounting Screws. VERTICAL & HORIZONTAL POSITION? – Our rotary table with four slots is 4” / 6” / 8” (100mm / 150mm / 200mm) in diameter, it can be used in horizontal and vertical positions, meeting two functions and also bringing you convenient as well as efficient milling experience. FANTASTIC MATERIAL? – HT200 Casting is mainly used to cast parts subjected to pressure and vibration on mechanical equipment. Adopted it as the material, our rotary milling table is durable, shock-absorbing, and heat-resistant. EXCELLENT PRECISION? – The rotary table for milling machine can be graduated 360 Degrees. Resetting dial and handwheel can be graduated in seconds. The enclosed design prevents the penetration of dirt and chips. CONVENIENT TO ADJUST? – The dial of the rotary table for mill is marked with an accurate scale. Just operate the control handle and adjust it to the desired position, which makes it possible to use it easily and conveniently. WIDE APPLICATION? – This mill rotary table is popular for its excellent performance, practical design, and high precision. They are widely used for circular cutting work, boring, spot facing, and similar work.

Vertical & Horizontal Milling Machine Rotary Table 360° for Indexing Drilling







Worktable with scale: 360 °. The vertical & horizontal rotary table, one of the main accessories of the milling machine, is a precision work positioning device. Or, mounted the rotary table on its end (or mount it “flat” on a 90° angle plate) so that it rotates about a horizontal axis.

Vertical & Horizontal Rotary Table Tilting 360° for Milling Drilling Machine







Worktable with scale: 360 °. The vertical & horizontal rotary table, one of the main accessories of the milling machine, is a precision work positioning device. Or, mounted the rotary table on its end (or mount it “flat” on a 90° angle plate) so that it rotates about a horizontal axis.
