How_To_Use_Fixed_Laser_Marking_Device_Laser_Engraving_Ring_Inside_And_Outside_01_pd

How To Use Fixed Laser Marking Device Laser Engraving Ring Inside And Outside

device, engraving, fixed, laser, marking, ring
Assorts_Rotary_Milling_Indexing_Table_for_Cutting_Around_a_Fixed_Axis_01_eco

Assorts’ Rotary Milling Indexing Table for Cutting Around a Fixed Axis

Assorts' Rotary Milling Indexing Table for Cutting Around a Fixed Axis
Assorts' Rotary Milling Indexing Table for Cutting Around a Fixed Axis
Assorts' Rotary Milling Indexing Table for Cutting Around a Fixed Axis

Assorts' Rotary Milling Indexing Table for Cutting Around a Fixed Axis
2.75 Watch Maker Rotary Table : Available in 2 & 4 clamping slot in the Base. Smallest mini Rotary Table for Milling operation with Table Diameter – 2.75 Inches (72 mm). Height when lay Horizontal :1.5 Inches (39 mm). Worm- Gear Ratio is 1: 48, which means that 1 handle rotation shall turn the table 7.5 degrees. Most preferred choice of Watch makers, Jewelry Tools, Model Makers & Hobbyists. 3 Inch/ 80 mm Horizontal Vertical Rotary Table. Made out of high grain casting, this precision quality low profile rotary table diameter is 80 mm (3Inches) and is most popular light weight rotary table for small and light duty milling operations. Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Hand wheel is graduated in divisions of 10 min & can be set to zero. Total Height when laid flat is 1-3/4 (44 mm). Center Height in vertical position: 1-3/4 (45 mm approx). Can be clamped both Horizontally and Vertically. Base Dimensions : 110 x 85 mm with 2 x U slots (7.5 mm wide) each wall for Horizontal and Vertical clamping purpose. It is mainly used to cut gear teeth accurately and equal spacing of the teeth of the gear. Also used for milling gears, splines, squares, cutting of flutes in reamers, drills and milling cutters, racks, grinders, etc. We also offer various accessories like Chucks, Back plates, Clamp kits, Collet Adaptors and Tailstock to suit these rotary table functioning. Pls check our other listings if you need anything from this category. 3 Inch/ 80 mm Tilting Rotary Table. Made out of high grain casting, this precision quality low profile rotary table diameter is 80 mm (3Inches) and is most popular light weight tilting rotary table for small and light duty milling operations. Can be clamped vertically and horizontally both ways. Designed to tilt between 0- 90 Degrees & can be locked at any working angle position. Total Height when laid flat is 2-7/16 (62 mm). Center Height in vertical position: 2-17/32 (61.5 mm approx). Base Dimensions : 100 x 105 mm with 2 x Drills (8 mm diameter) at a PCD of 82 mm approx. Weight of the Rotary Table : 2.700 Kgs. 4 Inch/ 100 mm Horizontal Vertical Rotary Table. Made of Caste Iron, Precision High Quality 4 /100 mm Regular Rotary Table designed for smaller milling machines. Height when laid horizontally 2-5/16 Inches (58 mm). Center Height in vertical position: 2-1/8 (53.5 mm approx). Base Dimensions : 135 mm x 105 mm with 2 x U slots (9.5 mm). Body is painted and Rest all working surfaces are precision ground. The Dial and locking screws are plated and Handle has epoxy black finish for a rust free life. Smooth Jerk free easy rotation with negligible play. The top of the table is ground to eliminate any excess run out. 4 Inch/ 100 mm Tilting Rotary Table. Brand New High Quality 4 /100 mm Precision Tilting Rotary Table Features to tilts between 0- 90 Degrees & can be locked at any working position. Provided with oil nipple for oiling of inside body. Center Height in horizontal position when lay flat : 2-3/4 (70 mm approx). Center Height in vertical position: 3 Inch approx (77 mm). Body & table are made of caste Iron. Rest of the parts are made of tool steel. Body is painted black. Knobs, dials and locking screws are all plated and Rest of the working surface are precisely ground. Rotary’s handle are knurled for firm gripping while rotating and epoxy black finish for a long rust free life. Base Dimensions : 142 x 128 mm. 2 Opposite counter drills of 9.5 mm diameter are located at a PCD of 102 mm approx for mounting. Pls note that we do not deliver to the PO Box Addresses. Please be aware that some countries may have local import regulations which restrict certain products from being imported. We take complete onus and responsibility of supplying you a completely brand new product without any manufacturing or transit damage. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “assortstools” and is located in this country: IN. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia.
  • Size-Type: 4\
  • Modified Item: No
  • Country/Region of Manufacture: India
  • Custom Bundle: No
  • Setting Position: Horizontal/Vertical
  • Tilting: Yes
  • Operation: Manual
  • Cross-Slide: No
  • Brand: Assorts

Assorts' Rotary Milling Indexing Table for Cutting Around a Fixed Axis
assorts', axis, cutting, fixed, indexing, milling, rotary, table