Author: admin
3/80 mm Tilting Rotary Table+ ER16 Collet Adaptor with M6 Clamp Kit-USA
3/80 mm Tilting Rotary Table+ ER16 Collet Adaptor with M6 Clamp Kit-USA. Made out of high grain casting, this precision quality low profile rotary table diameter is 80 mm (3Inches) and is most popular light weight tilting rotary table for small and light duty milling operations. Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Hand wheel is graduated in divisions of 10 min & can be set to zero. Designed to tilt between 0- 90 Degrees & can be locked at any working angle position. Total Height when laid flat is 2-7/16 (62 mm) without collet adaptor. The assembly height measures to be 98 mm (with ER16) adapter mounted on it. Center Height in vertical position: 2-17/32 (61.5 mm approx). Base Dimensions : 100 x 105 mm with 2 x Drills (8 mm diameter) at a PCD of 82 mm approx. Weight of the Rotary Table : 2.700 Kgs. Supplied with 1 Pc each of ER16 collet adaptor Pc, suitable M6 clamp kit which is hardened and ground before the epoxy black finish for a rust free life. Supplied with 1 Pc each of ER16 collet adaptor along with a M6 clamp kit which is hardened and ground before the epoxy black finish for a rust free life. It is mainly used to cut gear teeth accurately and equal spacing of the teeth of the gear. Also used for milling gears, splines, squares, cutting of flutes in reamers, drills and milling cutters, racks, grinders, etc. We also offer various accessories like Chucks, Back plates, Clamp kits, Collet Adaptors and Tailstock to suit these rotary table functioning. Pls check our other listings if you need anything from this category.
3(80 mm) Rotary Table with M6 Clamp Kit milling machine Indexing Table USA
3 Inch (80 mm) Rotary Table with M6 Clamp Kit milling machine Indexing Table. 3 (80 mm) Rotary Table- 4 Slots Table This Set includes Following. 2 x step blocks 2 x tee bolts with flanged nut M6 thread 2 x clamps. Table scale is calibrated in 5 degree increement. Can be used both in horizontal & vertical position. 1/4″ 4 T-Slots: 5/16″. SUITABLE M6 CLAMP KIT FOR THIS ROTARY TABLE This will fit both the Horizontal & Tilting model of our 3″ (80 mm) & 4″ (100 mm) Rotary – 4 Slots Table This Set includes Following: 2 x step blocks 2 x tee bolts with flanged nut M6 thread 2 x clamps Bolt length: 55 mm overall & Bolt Thread M6.
Sherline Rotary Table 3700. Incl hold-down hardware, chuck adapter & instruction
This Sherline Rotary Table 3700 is a reliable and sturdy option for your workholding needs. With its manual operation, it is easy to use and perfect for small to medium-sized jobs. Made in the United States, you can trust its quality and durability. It is a great addition to any workshop or manufacturing facility, and is sure to meet your needs. Whether you’re in the metalworking industry or just need a reliable rotary table, this Sherline Rotary Table 3700 is an excellent choice.
HV6 Rotary Table 6 Inch -150 mm 3 Slot Horizontal & Vertical
Manufactured from High grade seasoned casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1, which mean 1 handle rotation will move the table by 4 Degrees. T Slot 16 mm. Table is graduated 360 degree around its circumference. Can be clamped vertically and horizontally both ways. Horizontal Height : Approx 80mm from Base to Top surface of Chuck. Centre Height in Vertical Position: 105 mm. Table Graduated 360 Degrees, Resettable Dial & Handwheel graduated in seconds. Vernier scale is caliberated to 10 seconds. 2 Oiling Points for a direct lubrication of the Table for longer life & better performance. We offer compatible dividing plates, tailstock, chucks and clamp kit sets as well for this Rotary table. If you need one, pls check out our store to check them out. Vices & Work Holding. Measuring Tools & Equipments. Jewellery & Watch Making&########x9. Do It Yourself (DIY Tools)&########x9. HSS Cutting & Finishing Tools. Rotary Table HV6 (6 Inch -150 mm) 3 Slots USA FULFILLED. SEE OUR OTHER ITEMS FOR SALE. 50 mm/ 2 Inches Quick Release Steel Vise for Micro Milling Drill USA FULFILLED. Mini Vertical Slide (90 x 50 mm) for instant Milling Lathe Tool- (USA FULFILLED). Rigit Tailstock Die Holder for threading on Lathe Machine Tool (USA FULFILLED). ER-20 Collet Adapter for Instant Milling-Fits to 3″75 mm/ 4″ 100MM-USA FULFILLED. MT4 Triple Bearing Lathe Revolving Center For Metalworking-Under 5 Micron USA. 70 mm 4 Jaws Independent Chuck with Back Plate Milling Lathe Tool USA FULFILLED. Caste Iron 100 mm/ 4 Stepped Angle Plate Milling Machine Lathe USA FULFILLED. New Tool Post Mini Vertical Slide with 2 50 mm Steel Vice Milling USA FULFILLED. V Block Jig Fixture for Center Drilling on a Round Work-piece 2 (USA FULFILLED). 35mm Engineer Easy Bell Punch Hand DIY Tool Find Center Round Bar-USA FULFILLED. Caste Iron Small 1.5 Inches (38 mm) Jaw width Drill Press Vice Vise Machine. Caste Iron 100mm Round Vice for 4 (100mm) Rotary Table+M6 T-nut (USA FULFILLED). You will be glad to know that our tools are being manufactured in our own production facility in New Delhi (India) and are being inspected to ensure that they meet the required International quality benchmark as well as the expectations of our customers. We hold the Inventory of our good sellers in the USA & UK to offer the quickest possible deliveries to our customers. Pls note:- 1/. It is important to note that after the pandemic, although the logistic services have been improved a lot. However, they are still to reach their original positions. We expect our customers to understand and support us in such issues which are unforeseen and not in our control. However, we take complete onus and responsibility of supplying you with a completely brand-new product without any manufacturing or transit damage. Though we packed our goods with utmost care and strong packaging material, since our products are heavy, there could be transit damage in a few cases. However, it has been seen that such issues are not always a problem and our customers could still use them. In the majority of the cases, we have experienced that we manage to resolve the issue amicably without any trouble. So a discussion is the best way of a desired resolution. Listing and template services provided by inkFrog.
4” Regular Rotary Table with 70mm 4 Jaw Independent Chuck & M6 Clamp Kit-USA
4” Regular Rotary Table with 70mm 4 Jaw Independent Chuck & M6 Clamp Kit. Elevate your machining capabilities with our precision-engineered 4 Regular Rotary Table set. Designed for versatility and accuracy, this toolset includes a 70mm 4-Jaw Independent Chuck with a high-grain SG cast iron body and hardened, ground tool steel jaws, a tool steel back plate, and a comprehensive M6 clamp kit. Worm Gear Ratio: 1:36, providing a precise 10-degree rotation per handle turn. Graduated Hand Wheel: Marked in 10-minute divisions, with a zero-setting feature for accurate adjustments. Mounting Flexibility: Can be mounted both horizontally and vertically to suit various machining needs. Chuck Body: Constructed from high-grain SG cast iron for durability and stability. Jaws: Made from hardened and ground tool steel, ensuring long-lasting sharpness and precision. Back Plate and Fixings. Tool Steel Back Plate: Includes T-nuts and bolts for secure mounting of the chuck. Versatile Back Plate Design: Drilled to fit both 3-slot and 4-slot rotary tables, with a locating spigot for accurate alignment. M6 Clamp Kit: Ensures secure attachment of the rotary table to your machine, providing stability during operation. Perfect for a range of machining tasks, this rotary table set combines durability, precision, and flexibility to meet your workshop’s needs. Whether for precise angle adjustments or secure workholding, this toolset is designed to deliver consistent and reliable performance.
New 4 Inches (100mm) Rotary Table +70 mm 4 Jaw Independent Chuck+ Backplate USA
HV 4″ INCH 100 MM ROTARY TABLE WITH SMALL CHUCK & BACK PLATE MILLING INDEXING (4″/100 MM ROTARY TABLE WITH 70 MM 4 JAW INDEPENDENT CHUCK). Tool Set of 4 Regular Rotary Table with 70 mm 4 Jaws Independent Chuck with Back Plate & fixingsT nut Bolts. Chuck Body is High Grain SG Caste Iron & Jaws are of Tool Steel. Jaws are Hardened & Ground. A Tool Steel Back Plate is supplied with Fixing T nuts to Mount the Chuck on It. Back Plate is Drill in a manner that it will fit both 3 as well as 4 slots Table. The Back side of the Plate has a locating Spigot to center the Mounting on to the Table. It can be mounted both in Horizontal & vertical position. Hand wheel is graduated in divisions of 10 min & can be set to zero.
ADI Small HV 3 Inch II 80 mm Rotary Milling Indexing Table with Clamp Kit
Small HV 3 Inch II 80 mm Rotary Milling Indexing Table with Clamp Kit. A rotary table is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed (usually horizontal or vertical) axis. A clamp kit for a rotary table is used to secure workpieces onto the rotary table during machining operations. Rotary tables are often used in machining setups to enable circular cutting, hole drilling, and other operations around a fixed axis of rotation. Compact & Low-Profile Design. Table Diameter: The rotary table features a 3-inch (80 mm) diameter, making it perfect for small-scale milling operations where space and precision are critical. Vertical Height: With a vertical height of just 1-5/8 inches, this rotary table maintains a low profile, enabling it to fit seamlessly into your existing setup while maximizing available workspace. Gear Ratio: The rotary table boasts a 36:1 gear ratio, ensuring precise control over the rotation. One full rotation of the handle results in a 10-degree rotation of the table, allowing for meticulous adjustments during milling tasks. Scale Calibration: The table scale is finely calibrated in 5-degree increments, providing clear and accurate angle measurements. This feature is particularly useful for tasks requiring high precision and consistency. Horizontal & Vertical Use: This rotary table is designed for maximum versatility, capable of operating in both horizontal and vertical positions. This dual functionality allows for a wide range of applications, from simple flat milling to more complex angular cuts. Base Dimensions: The base of the rotary table measures 4-1/8″ x 3-1/4″, providing a stable and secure platform for your work. The compact dimensions ensure that the table remains sturdy during use, minimizing vibrations and enhancing accuracy. T-Slots: The base is equipped with four 5/16 T-slots, allowing for secure clamping of workpieces. These slots are designed to accommodate various clamping setups, ensuring your workpiece remains firmly in place throughout the milling process. This M6 clamp kit is designed for use with 3″ or 4″ rotary tables. Includes a set of clamps, bolts, nuts, and T-slot nuts. Compatible with rotary tables featuring M6 T-slots or mounting holes. Allows for secure fastening of workpieces onto the rotary table during machining operations. Made of tool steel for durability and reliability. Provides essential holding power to maintain precision and accuracy. Ideal for use in machining setups requiring precise rotary table positioning.
ALLENAIR ROTARY PNEUMATIC AIR INDEX TABLE No. 725-GC-6 EXCELLENT USA
AllenAir Rotary Pneumatic Air Index Table. Mineola, NY – USA. Excellent, used condition (see photos); shows normal signs of use. You are purchasing what is shown in photos only. So, if it is not in the photos don’t assume, please ask questions. All photos are of the actual product(s) you will receive and are intended to help describe the quality and condition of the piece(s). We take pride in our products and pack them securely so they arrive ready for work. Questions about our products or requests for additional photos are welcome. We offer a wide selection of. Work/craft tools & supplies. Unique gift ideas, and home décor solutions.
3/80 mm Tilting Rotary Table+ ER 20 Collet Adaptor with M6 Clamp Kit-USA
3/80 mm Tilting Rotary Table+ ER 20 Collet Adaptor with M6 Clamp Kit-USA. Made out of high grain casting, this precision quality low profile rotary table diameter is 80 mm (3Inches) and is most popular light weight tilting rotary table for small and light duty milling operations. Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Hand wheel is graduated in divisions of 10 min & can be set to zero. Designed to tilt between 0- 90 Degrees & can be locked at any working angle position. Total Height when laid flat is 2-7/16 (62 mm) without collet adaptor. The assembly height measures to be 101 mm approx (with ER20) collet adapter mounted on it. Center Height in vertical position: 2-17/32 (61.5 mm approx). Base Dimensions : 100 x 105 mm with 2 x Drills (8 mm diameter) at a PCD of 82 mm approx. Weight of the Rotary Table : 2.700 Kgs. Supplied with 1 Pc each of ER20 collet adaptor, suitable M6 clamp kit which is hardened and ground before the epoxy black finish for a rust free life. Supplied with 1 Pc of ER20 collet adaptor along with a M6 clamp kit which is hardened and ground before the epoxy black finish for a rust free life. It is mainly used to cut gear teeth accurately and equal spacing of the teeth of the gear. Also used for milling gears, splines, squares, cutting of flutes in reamers, drills and milling cutters, racks, grinders, etc. We also offer various accessories like Chucks, Back plates, Clamp kits, Collet Adaptors and Tailstock to suit these rotary table functioning. Pls check our other listings if you need anything from this category.
