Assorts_Rotary_Milling_Indexing_Table_for_Cutting_Around_a_Fixed_Axis_01_eco

Assorts’ Rotary Milling Indexing Table for Cutting Around a Fixed Axis

Assorts' Rotary Milling Indexing Table for Cutting Around a Fixed Axis
Assorts' Rotary Milling Indexing Table for Cutting Around a Fixed Axis
Assorts' Rotary Milling Indexing Table for Cutting Around a Fixed Axis

Assorts' Rotary Milling Indexing Table for Cutting Around a Fixed Axis
2.75 Watch Maker Rotary Table : Available in 2 & 4 clamping slot in the Base. Smallest mini Rotary Table for Milling operation with Table Diameter – 2.75 Inches (72 mm). Height when lay Horizontal :1.5 Inches (39 mm). Worm- Gear Ratio is 1: 48, which means that 1 handle rotation shall turn the table 7.5 degrees. Most preferred choice of Watch makers, Jewelry Tools, Model Makers & Hobbyists. 3 Inch/ 80 mm Horizontal Vertical Rotary Table. Made out of high grain casting, this precision quality low profile rotary table diameter is 80 mm (3Inches) and is most popular light weight rotary table for small and light duty milling operations. Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Hand wheel is graduated in divisions of 10 min & can be set to zero. Total Height when laid flat is 1-3/4 (44 mm). Center Height in vertical position: 1-3/4 (45 mm approx). Can be clamped both Horizontally and Vertically. Base Dimensions : 110 x 85 mm with 2 x U slots (7.5 mm wide) each wall for Horizontal and Vertical clamping purpose. It is mainly used to cut gear teeth accurately and equal spacing of the teeth of the gear. Also used for milling gears, splines, squares, cutting of flutes in reamers, drills and milling cutters, racks, grinders, etc. We also offer various accessories like Chucks, Back plates, Clamp kits, Collet Adaptors and Tailstock to suit these rotary table functioning. Pls check our other listings if you need anything from this category. 3 Inch/ 80 mm Tilting Rotary Table. Made out of high grain casting, this precision quality low profile rotary table diameter is 80 mm (3Inches) and is most popular light weight tilting rotary table for small and light duty milling operations. Can be clamped vertically and horizontally both ways. Designed to tilt between 0- 90 Degrees & can be locked at any working angle position. Total Height when laid flat is 2-7/16 (62 mm). Center Height in vertical position: 2-17/32 (61.5 mm approx). Base Dimensions : 100 x 105 mm with 2 x Drills (8 mm diameter) at a PCD of 82 mm approx. Weight of the Rotary Table : 2.700 Kgs. 4 Inch/ 100 mm Horizontal Vertical Rotary Table. Made of Caste Iron, Precision High Quality 4 /100 mm Regular Rotary Table designed for smaller milling machines. Height when laid horizontally 2-5/16 Inches (58 mm). Center Height in vertical position: 2-1/8 (53.5 mm approx). Base Dimensions : 135 mm x 105 mm with 2 x U slots (9.5 mm). Body is painted and Rest all working surfaces are precision ground. The Dial and locking screws are plated and Handle has epoxy black finish for a rust free life. Smooth Jerk free easy rotation with negligible play. The top of the table is ground to eliminate any excess run out. 4 Inch/ 100 mm Tilting Rotary Table. Brand New High Quality 4 /100 mm Precision Tilting Rotary Table Features to tilts between 0- 90 Degrees & can be locked at any working position. Provided with oil nipple for oiling of inside body. Center Height in horizontal position when lay flat : 2-3/4 (70 mm approx). Center Height in vertical position: 3 Inch approx (77 mm). Body & table are made of caste Iron. Rest of the parts are made of tool steel. Body is painted black. Knobs, dials and locking screws are all plated and Rest of the working surface are precisely ground. Rotary’s handle are knurled for firm gripping while rotating and epoxy black finish for a long rust free life. Base Dimensions : 142 x 128 mm. 2 Opposite counter drills of 9.5 mm diameter are located at a PCD of 102 mm approx for mounting. Pls note that we do not deliver to the PO Box Addresses. Please be aware that some countries may have local import regulations which restrict certain products from being imported. We take complete onus and responsibility of supplying you a completely brand new product without any manufacturing or transit damage. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “assortstools” and is located in this country: IN. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia.
  • Size-Type: 4\
  • Modified Item: No
  • Country/Region of Manufacture: India
  • Custom Bundle: No
  • Setting Position: Horizontal/Vertical
  • Tilting: Yes
  • Operation: Manual
  • Cross-Slide: No
  • Brand: Assorts

Assorts' Rotary Milling Indexing Table for Cutting Around a Fixed Axis
assorts', axis, cutting, fixed, indexing, milling, rotary, table
previous page · next page
Moore_Precision_Tool_Rotary_Table_4_Axis_Motorized_Rotary_Table_CNC_01_gjh

Moore Precision? Tool Rotary Table 4 Axis Motorized Rotary Table CNC

Moore Precision? Tool Rotary Table 4 Axis Motorized Rotary Table CNC
Moore Precision? Tool Rotary Table 4 Axis Motorized Rotary Table CNC
Moore Precision? Tool Rotary Table 4 Axis Motorized Rotary Table CNC
Moore Precision? Tool Rotary Table 4 Axis Motorized Rotary Table CNC
Moore Precision? Tool Rotary Table 4 Axis Motorized Rotary Table CNC
Moore Precision? Tool Rotary Table 4 Axis Motorized Rotary Table CNC
Moore Precision? Tool Rotary Table 4 Axis Motorized Rotary Table CNC
Moore Precision? Tool Rotary Table 4 Axis Motorized Rotary Table CNC
Moore Precision? Tool Rotary Table 4 Axis Motorized Rotary Table CNC
Moore Precision? Tool Rotary Table 4 Axis Motorized Rotary Table CNC
Moore Precision? Tool Rotary Table 4 Axis Motorized Rotary Table CNC
Moore Precision? Tool Rotary Table 4 Axis Motorized Rotary Table CNC

Moore Precision? Tool Rotary Table 4 Axis Motorized Rotary Table CNC
Tool Rotary Table 4 Axis Motorized Rotary Table CNC? . Used condition with dings and scratches. Please see photos for details. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “820jimmyj” and is located in this country: US. This item can be shipped to United States.
  • Brand: Moore Special Tool
  • Setting Position: Horizontal/Vertical
  • Operation: Manual
  • Country/Region of Manufacture: United States

Moore Precision? Tool Rotary Table 4 Axis Motorized Rotary Table CNC
axis, moore, motorized, precision, rotary, table, tool
previous page · next page
3_80mm_Rotary_Table_With_Suitable_Tailstock_M6_ClampKit_Vice_Round_Vise_Milling_01_mopc

3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling

3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling

3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
3 ROTARY TABLE WITH 80mm ROUND VICE, TAILSTOCK & CLAMPING KIT. DESCRIPTION FOR ROTARY TABLE 3. Table Height : 1-5/8 (44mm). Can be used in both Horizontal & Vertical position. Hand Wheel calibrated to 10 degree per revolution with 1/4 degree increment graduations. Table scale graduated in 5 degree increments. DESCRIPTION FOR SINGLE BOLT TAILSTOCK. Dead Center Height (Min – Max). 1-7/16″ (37mm) – 3-5/8″ (92mm). This Tailstock is mostly used in between our Rotary Table 3″, Rotary Table 3″ Tilting, Rotary Table 4″, Rotary Table 4″ Tilting and Rotary Table 4 HV4 Models. It is used when between Centre Work is required. These are adjustable for different heights & also having fine feed center point and the center tip is hardened and Ground. It is made up of good grade of cast iron. It is Very useful product to use. DESCRIPTION FOR 80mm ROUND VICE. Vice Diameter of Base: 3 (80mm). Vice Jaw Width: 2-7/16 (62mm). Vice Jaw Depth: 3/4 (19mm). Vice Jaw Opening: 1-5/8 (27mm). Vice Height: 1-1/4 (31mm). Made of high grade close grained seasoned cast Iron. Fits our 3″ (80mm) & 4″ (100mm) Rotary Tables perfectly. The moving jaw has V-grooves to hold Round objects. These vices are counter- drilled in a manner that these can fit to a 3 as well 4 slot table. DESCRIPTION FOR CLAMPING KIT. Length Of Clamp : 2-1/2 (63mm). Width Of Clamp : 1 (25mm). Hole Of Clamp : 5/16 (8mm). Thickness of Clamp : 1/2 (13mm). Length Of Block : 1-1/2 (38mm). Width Of Block : 1 (25mm). Height Of Block : 1 (25mm). These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. Set Includes 2 Clamps, 2 Blocks, 2 Stud Screws and T-nuts as well as flange nut of Metric Thread. These are Polished and Ground from all the Sides. KIT INCLUDES : ROTARY TABLE + ROUND VICE + TAILSTOCK + CLAMPING KIT + T-NUTS. Please be aware that some countries may have local import regulations which restrict certain products from being imported. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “toolinghub” and is located in this country: IN. This item can be shipped worldwide.
  • Modified Item: No
  • Country/Region of Manufacture: India
  • Custom Bundle: No
  • Setting Position: Horizontal/Vertical
  • Tilting: No
  • Vice Height: 1-1/4\
  • Rotary Table Hand Wheel Calibrated To: 10 degree per revolution
  • Kit includes: ROTARY TABLE, ROUND VICE, TAILSTOCK, CLAMPING KIT & T-NUTS
  • Rotary Table Height: 1-5/8\
  • Packing: Hard Board Box
  • Free shipping To: USA, UK, Italy, Spain, France, Mexico
  • Table Scale Graduated: 5 Degree
  • Single Bolt Tailstock Suitable For: Rotary Table 3\
  • Operation: Manual
  • ailstock Dead Center Height (Min – Max): 1-7/16\
  • Rotary Table Dia.: 3-1/8\
  • Rotary Table Slots: 4
  • Vice Diameter of Base: 3\
  • Vice Jaw Width: 2-7/16\
  • Vice Jaw Depth: 3/4\
  • Vice Jaw Opening: 1-5/8\
  • Brand: ToolingHub
  • UPC: 369251307185

3 80mm Rotary Table With Suitable Tailstock M6 ClampKit Vice Round Vise Milling
80mm, clampkit, milling, rotary, suitable, table, tailstock, vice, vise
previous page · next page
Hv_4rotary_Table_M6_Clamp_Kit_Tailstock_with_70_MM_4_Jaw_Independent_Chuck_01_gsx

Hv 4rotary Table & M6 Clamp Kit & Tailstock(with 70 MM 4 Jaw Independent Chuck)

Hv 4rotary Table & M6 Clamp Kit & Tailstock(with 70 MM 4 Jaw Independent Chuck)
Hv 4rotary Table & M6 Clamp Kit & Tailstock(with 70 MM 4 Jaw Independent Chuck)
Hv 4rotary Table & M6 Clamp Kit & Tailstock(with 70 MM 4 Jaw Independent Chuck)
Hv 4rotary Table & M6 Clamp Kit & Tailstock(with 70 MM 4 Jaw Independent Chuck)
Hv 4rotary Table & M6 Clamp Kit & Tailstock(with 70 MM 4 Jaw Independent Chuck)
Hv 4rotary Table & M6 Clamp Kit & Tailstock(with 70 MM 4 Jaw Independent Chuck)

Hv 4rotary Table & M6 Clamp Kit & Tailstock(with 70 MM 4 Jaw Independent Chuck)
HV 4ROTARY TABLE & M6 CLAMP KIT & TAILSTOCK (WITH 70 MM 4 JAW INDEPENDENT CHUCK). ROTARY TABLE COMBO. SET OF QUALITY 4 INCHES/ 100 MM REGULAR ROTARY TABLE WITH SUITABLE TAILSTOCK, M6 CLAMP KIT, 70 MM 4 JAW INDEPENDENT CHUCK & ROUND VISES/ VICES. TABLE DIAMETER IS 4 / 100 MM & IS GRADUATED 360 DEGREES. WORM: GEAR RATIO IS 1: 36, WHICH MEANS 1 HANDLE ROTATION TURNS THE TABLE BY 10 DEGREES. CENTER HEIGHT IN VERTICAL POSITION 2-1/16/ 50 MM (ONLY THE TABLE). IT CAN BE MOUNTED HORIZONTALLY AND VERTICALLY. SUPPLIED WITH A TAILSTOCK, CLAMP KIT & QUALITY CASTE IRON ROUND VICE WITH CLAMPING T NUTS. THE MOVING JAW HAS VERTICAL & HORIZONTAL V GROOVES TO HOLD A ROUND JOB. Please be aware that some countries may have local import regulations which restrict certain products from being imported. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “toolswholesale” and is located in this country: IN. This item can be shipped worldwide.
  • Modified Item: No
  • Country/Region of Manufacture: India
  • Custom Bundle: No
  • Setting Position: Horizontal/Vertical
  • Tilting: No
  • Material: Tool Steel & Caste Iron
  • Country/RegionofManufacture: India
  • Operation: Manual
  • Cross-Slide: Yes
  • Brand: TOOLSWHOLESALE

Hv 4rotary Table & M6 Clamp Kit & Tailstock(with 70 MM 4 Jaw Independent Chuck)
4''rotary, chuck, clamp, independent, table, tailstockwith
previous page · next page
New_Rotary_Table_3_Inch_75mm_Horizontal_Vertical_Model_Milling_Machine_01_dlpq

New Rotary Table 3 Inch 75mm Horizontal Vertical Model Milling Machine

New Rotary Table 3 Inch 75mm Horizontal Vertical Model Milling Machine

New Rotary Table 3 Inch 75mm Horizontal Vertical Model Milling Machine
OMEX New Rotary Table 3 Inch – 75MM Horizontal & Vertical Model – Milling Machine. Rotary Table 3 Inch – 75mm Horizontal & Vertical Model. 1/4″ 4 T-Slots: 5/16″ – Vertical Height – 1-5/8 Inch. Table Scale is Calibrated in 5 degree increment. Can be used both in horizontal & vertical position. Gear Ratio – 36:1, which basically means that the 1 rotation of the handle shall rotate the table by 10 degrees. Free – T Slot Cleaner With Table. Please wait for the result of cancellation. The order will be processed and completed by automatic warehouse system within 5 minutes. Sending direct message to cancel the order is not allowed for every case. Damage caused by undue wear tear, misuse, improper installation or operation, neglect, accidents. Damage caused by natural disasters, flood fire, lightning, or pollution. If the item was opened, any parts removed or repaired by any unauthorized person. If damaged parts are the TFT screen or the screen has less than 3 dead pixels. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “paweboon_0″ and is located in this country: US. This item can be shipped to United States.
  • Brand: OMEX

New Rotary Table 3 Inch 75mm Horizontal Vertical Model Milling Machine
75mm, horizontal, inch, machine, milling, model, rotary, table, vertical
previous page · next page
HV4_110_MM_Horizontal_Vertical_Rotary_Table_Milling_Machine_Tools_01_xldu

HV4 (110 MM) Horizontal Vertical Rotary Table Milling Machine Tools

HV4 (110 MM) Horizontal Vertical Rotary Table Milling Machine Tools
HV4 (110 MM) Horizontal Vertical Rotary Table Milling Machine Tools
HV4 (110 MM) Horizontal Vertical Rotary Table Milling Machine Tools

HV4 (110 MM) Horizontal Vertical Rotary Table Milling Machine Tools
Table Diameter is 110 mm with MT2 Bore. Table Height when laid Horizontally 80 mm. Worm -Gear Ratio is 1: 90, which means 1 handle rotation turns the Table by 4 Degrees. 4-Jaws x 6″/ 150 mm Wood Lathe Chuck Threaded 3/4″ x 16 with Independently Adjustable / Reversible Jaws. Handwheel graduated in seconds. 2 Oiling Points for a direct lubrication of the Table for longer life & better performance. Can be clamped in Horizontal as well Vertical Position. Vernier scale calibrated to 10 seconds quick release system for manual indexing. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “tools-shop2020″ and is located in this country: IN. This item can be shipped to United States.
  • Brand: Unbranded
  • Operation: Manual
  • Setting Position: Tilting

HV4 (110 MM) Horizontal Vertical Rotary Table Milling Machine Tools
horizontal, machine, milling, rotary, table, tools, vertical
previous page · next page
New_Open_Box_HHIP_3900_2304_Horizontal_Vertical_Rotary_Table_4_01_hk

New Open Box HHIP 3900-2304 Horizontal/Vertical Rotary Table, 4

New Open Box HHIP 3900-2304 Horizontal/Vertical Rotary Table, 4

New Open Box HHIP 3900-2304 Horizontal/Vertical Rotary Table, 4
4 Horizontal/Vertical Rotary Table. 10 second vernier reading. One rotation of handle equals 4° on the collar. Center height is 2.75. Gear ratio is 72:1. Center hole is 2MT. Number of t-slots is 4. Squareness is 0.0008. Base parallelism (face to face) is 0.0004. Taper center bore concentricity is 0.0008. Clamping surface flatness is 0.0006. I inspect open box items to the best of my ability. If you have any issues/concerns with the item upon receipt please contact me immediately for resolution. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “dharrold000″ and is located in this country: US. This item can be shipped to United States.
  • Modified Item: No
  • Country/Region of Manufacture: United States
  • Custom Bundle: No
  • Setting Position: Horizontal/Vertical
  • MPN: 3900-2304
  • Cross-Slide: No
  • Brand: HHIP

New Open Box HHIP 3900-2304 Horizontal/Vertical Rotary Table, 4
3900-2304, hhip, horizontalvertical, open, rotary, table
previous page · next page
Cutting_A_Radius_With_A_Rotary_Table_01_wm

Cutting A Radius With A Rotary Table

cutting, radius, rotary, table
previous page · next page
Hv_4_Rotary_Table_M6_Clamp_Kit_t_nutswith_70_MM_4_Jaw_Independent_Chuck_01_yqm

Hv 4 Rotary Table & M6 Clamp Kit +t-nutswith 70 MM 4 Jaw Independent Chuck

Hv 4 Rotary Table & M6 Clamp Kit +t-nutswith 70 MM 4 Jaw Independent Chuck

Hv 4 Rotary Table & M6 Clamp Kit +t-nutswith 70 MM 4 Jaw Independent Chuck
Quality Tool Set of 4 Regular Rotary Table, M6 Clamp Kit with a suitable Tailstock & 70 mm 4 jaws Independent Small Chuck with Back Plate & fixingsT nut Bolts. Chuck Body is High Grain SG Caste Iron & Jaws are of Tool Steel. Jaws are Hardened & Ground. A Tool Steel Back Plate is supplied with Fixing T nuts to Mount the Chuck on It. Back Plate is Drill in a manner that it will fit both 3 as well as 4 slots Table. The Back side of the Plate has a locating Spigot to center the Mounting on to the Table. It can be mounted both in Horizontal & vertical position. Hand wheel is graduated in divisions of 10 min & can be set to zero. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “toolswholesale” and is located in this country: IN. This item can be shipped worldwide.
  • Setting Position: Horizontal/Vertical
  • Material: Tool Steel & Caste Iron
  • Country/RegionofManufacture: India
  • Operation: Manual
  • Brand: Unbranded

Hv 4 Rotary Table & M6 Clamp Kit +t-nutswith 70 MM 4 Jaw Independent Chuck
chuck, clamp, independent, rotary, t-nutswith, table
previous page · next page
Rotary_Table_3_Inch_80_mm_Horizontal_And_Vertical_4_Slot_Set_Of_2_Pieces_01_na

Rotary Table 3 Inch 80 mm Horizontal And Vertical 4 Slot Set Of 2 Pieces

Rotary Table 3 Inch 80 mm Horizontal And Vertical 4 Slot Set Of 2 Pieces

Rotary Table 3 Inch 80 mm Horizontal And Vertical 4 Slot Set Of 2 Pieces
3 Rotary Table Horizontal & Vertical. Table graduated 360 degrees, Nice smooth rotation. Vertical centre height 44 mm, in 4 Slots. Base Dimensions: 4-1/8″ x 3-1/4″. Regular 80 mm horizontal/ vertical Rotary Table complete. One turn = 10 degrees. Table scale graduated in 5 degree increments. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Rotary Tables”. The seller is “trending-toolz” and is located in this country: IN. This item can be shipped worldwide.
  • Brand: Unbranded
  • Country/Region of Manufacture: India
  • Dia: 80 mm
  • Operation: Manual
  • Setting Position: Horizontal/Vertical
  • Slot: 4
  • Vertical centre height: 44 mm

Rotary Table 3 Inch 80 mm Horizontal And Vertical 4 Slot Set Of 2 Pieces
horizontal, inch, pieces, rotary, slot, table, vertical
previous page · next page