70_mm_4_Jaw_Independent_Chuck_with_Back_Plate_Rotary_Table_USA_Fulfilled_01_uhao

70 mm 4 Jaw Independent Chuck with Back Plate Rotary Table (USA Fulfilled)

70 mm 4 Jaw Independent Chuck with Back Plate Rotary Table (USA Fulfilled)
70 mm 4 Jaw Independent Chuck with Back Plate Rotary Table (USA Fulfilled)
70 mm 4 Jaw Independent Chuck with Back Plate Rotary Table (USA Fulfilled)
70 mm 4 Jaw Independent Chuck with Back Plate Rotary Table (USA Fulfilled)

70 mm 4 Jaw Independent Chuck with Back Plate Rotary Table (USA Fulfilled)
(With 4/ 100 mm Rotary Table). Made of Caste Iron, Precision High Quality 4 /100 mm Regular Rotary Table designed for smaller milling machines. Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Can be clamped vertically and horizontally both ways. Height when laid horizontally 2-5/16 Inches (58 mm) without the Chuck on it. When Chuck is mounted, the total height becomes 130 mm. Center Height in vertical position: 2-1/8 (53.5 mm approx). Hand wheel is graduated in divisions of 10 min & can be set to zero. Base Dimensions : 135 mm x 105 mm with 2 x U slots (9.5 mm). Body is painted and Rest all working surfaces are precision ground. The Dial and locking screws are plated and Handle has epoxy black finish for a rust free life. Smooth Jerk free easy rotation with negligible play. The top of the table is ground to eliminate any excess run out. It is mainly used to cut gear teeth accurately and equal spacing of the teeth of the gear. Also used for milling gears, splines, squares, cutting of flutes in reamers, drills and milling cutters, racks, grinders, etc. Supplied with 70 MM 4 JAW INDEPENDENT chuck with spare set of reversible jaws and a chuck key, Also included a suitable steel back plate with fixing t nuts and bolts to enable this to mount it on this 4/100 mm Rotary table. The Back plate is drilled with M6 size tapped holes for the chuck’s bolts to be screwed with the back plate and then provided with 2 counter drills to them clamp it with the Rotary table’s T slots. (With 3/ 80 mm Tilting Rotary Table). Made out of high grain casting, this precision quality low profile rotary table diameter is 80 mm (3Inches) and is most popular light weight tilting rotary table for small and light duty milling operations. Designed to tilt between 0- 90 Degrees & can be locked at any working angle position. Total Height when laid flat is 2-7/16 (62 mm) without the Chuck on it. When Chuck is mounted, the total height becomes 135 mm. Center Height in vertical position: 2-17/32 (61.5 mm approx). Base Dimensions : 100 x 105 mm with 2 x Drills (8 mm diameter) at a PCD of 82 mm approx. Weight of the Rotary Table : 2.700 Kgs. Supplied with a suitable M6 clamp kit which is hardened and ground before the epoxy black finish for a rust free life. Supplied with 80 mm 3 jaw self centering chuck with spare set of reversible jaws and a chuck key, Also included a suitable steel back plate with fixing t nuts and bolts to enable this to mount it on this 3 /80 mm Tilting Rotary table. (With 3/80 mm Rotary Table). Made out of high grain casting, this precision quality low profile rotary table diameter is 80 mm (3Inches) and is most popular light weight rotary table for small and light duty milling operations. Total Height when laid flat is 1-3/4 (44 mm) without the Chuck on it. When Chuck is mounted, the total height becomes 115 mm. Center Height in vertical position: 1-3/4 (45 mm approx) without the chuck. Can be clamped both Horizontally and Vertically. Rotary Table’s Base Dimensions : 110 x 85 mm with 2 x U slots (7.5 mm wide) each wall for Horizontal and Vertical clamping purpose. Supplied with 80 mm 3 jaw self centering chuck with spare set of reversible jaws and a chuck key, Also included a suitable steel back plate with fixing t nuts and bolts to enable this to mount it on this 3 /80 mm Rotary table. (With 4/ 100 mm Tilting Rotary Table). Brand New High Quality 4 /100 mm Precision Tilting Rotary Table Features to tilts between 0- 90 Degrees & can be locked at any working position. Provided with oil nipple for oiling of inside body. Center Height in horizontal position when lay flat : 2-3/4 (70 mm approx) without the Chuck on it. When Chuck is mounted, the total height becomes 140 mm. Center Height in vertical position: 3 Inch approx (77 mm). Body & table are made of caste Iron. Rest of the parts are made of tool steel. Body is painted black. Knobs, dials and locking screws are all plated and Rest of the working surface are precisely ground. Rotary’s handle are knurled for firm gripping while rotating and epoxy black finish for a long rust free life. Base Dimensions : 142 x 128 mm. 2 Opposite counter drills of 9.5 mm diameter are located at a PCD of 102 mm approx for mounting. Supplied with 80 mm 3 jaw self centering chuck with spare set of reversible jaws and a chuck key, Also included a suitable steel back plate with fixing t nuts and bolts to enable this to mount it on this 4 /100 mm Tilting Rotary table. (Only 70 MM 4 Jaw Chuck with Back Plate). Brand New, High Precision- Superb Quality! 70 mm 4 Jaws Self Centering Chuck with Back Plate & Fixing- Suitable to Mount on 3″ (75 mm) & 4″ (100 mm) Rotary Table -4 Slots Tables. Designed to fit our 3 or 4 Rotary table 4 slots. The chuck mounting is standard Uni-mat Thread M14 x 1. Vices & Work Holding. Measuring Tools & Equipments. Jewellery & Watch Making&########x9. Do It Yourself (DIY Tools)&########x9. HSS Cutting & Finishing Tools. 70 mm 4 Jaw Independent Chuck with Back Plate Rotary Table (USA Fulfilled). You will be glad to know that our tools are being manufactured in our own production facility in New Delhi (India) and are being inspected to ensure that they meet the required International quality benchmark as well as the expectations of our customers. We hold the Inventory of our good sellers in the USA & UK to offer the quickest possible deliveries to our customers. Pls note:- 1/. It is important to note that after the pandemic, although the logistic services have been improved a lot. However, they are still to reach their original positions. We expect our customers to understand and support us in such issues which are unforeseen and not in our control. However, we take complete onus and responsibility of supplying you with a completely brand-new product without any manufacturing or transit damage. Though we packed our goods with utmost care and strong packaging material, since our products are heavy, there could be transit damage in a few cases. However, it has been seen that such issues are not always a problem and our customers could still use them. In the majority of the cases, we have experienced that we manage to resolve the issue amicably without any trouble. So a discussion is the best way of a desired resolution. SEE OUR OTHER ITEMS FOR SALE. 80 mm 4 Jaws Independent Dog chuck with Back Plate & T nuts – (USA FULFILLED). 3 Pieces Spring Caliper Set – Inside, Outside & Divider 6 inch (USA FULFILLED). KNURLING TOOL PIVOT HEAD DIAMOND METRIC PITCHES PATTERN 1/2 SQ. Assorts Ball Turning Attachment (Exclusive Feature of Bearing Base) ROUND BASE. Single wheel knurling tool holder with 5 spare HSS knurls (USA FULFIILED). 4 (100 MM) ROTARY TABLE WITH 65MM 3 JAWS & 70MM 4 JAWS WITH BACK PLATE & TNUTS. Automatic Center Punch with Replaceable Hardened Steel Tip tool (USA FULFILLED). T-HANDLE TAP WRENCH SET OF 3 PCS SOLID COLLET JAWS – (USA FULFILLED). Supreme die holder with chuck. Single Wheel Straight Linear Knurling Hand Tool 3/4″ x 3/4″ x 5 (USA FULFILLED). Clamp Type Lathe Knurling Tools II 3/8″ Sq x Long 5-3/4″ Inch Tail (USA FULFILL). 4 regular Rotary Table +70 mm 4 Jaw Chuck+ Back Plate+ Fixing USA FULFILLED. Floating Tailstock Die holder 2MT Shank-Imperial Dies – USA FULFILLED. Spring Loaded Clamp Type Knurling Tool 2″ Capacity 3/8″ Hand Tools USA FULFILLED. HV6-4 Slots Rotary Table & Steel Dividing Plates Set USA FULFILLED. SLITTING/SLOTTING SAW HOLDER WITH CIRCULAR SAW BLADE – USA Fulfilled. New Mini V-Clamp Adjustable Spring Type Knurling Tool. Lathe Tailstock Die Holder – Tapping Threading Reaming Drilling Tools (MT3). Assorts Lathe Tool Ball Turning Attachment Oval Base- Single Bit (USA FULFILLED). Spindle Live Revolving Center, Morse Taper MT4 with Interchangeable Tips. Listing and template services provided by inkFrog.
70 mm 4 Jaw Independent Chuck with Back Plate Rotary Table (USA Fulfilled)
back, chuck, fulfilled, independent, plate, rotary, table